Dana Making – EIRI – eBooks and Project Reports https://projectreports.eiriindia.org We Create Industrialist Sat, 01 Jun 2019 03:59:18 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://projectreports.eiriindia.org/wp-content/uploads/2018/12/cropped-logo-1-32x32.jpg Dana Making – EIRI – eBooks and Project Reports https://projectreports.eiriindia.org 32 32 Hand Book of Plastic Materials and Processing Technology https://projectreports.eiriindia.org/product/hand-book-plastic-materials-processing-technology/ Wed, 19 Feb 2014 10:39:56 +0000 http://projectreports.eiriindia.org/?post_type=product&p=1244 The book covers Introduction of Plastic Materials, Polyethylene, Linear Low Density Polyethylene (LLDPE), Polypropylene, Copolymers of Ethylene, Polystyrene, Acrylic Plastics, Poly (Methyl Methacrylate), Acrylic Fibres, Poly (Vinyl Acetate), Poly (Vinyl Chloride), Polytetrafluoroethylene (PTFE), Coumarone-Indene Resins, Polyacetals and Polyethers (Acetal Resins), Polyamides, Polyimides, Polyesters, Polyurethanes, Polycarbonates, Epoxy Resins, Cellulose Plastics, Phenolic Resins, Amino Resins, Silicones, Additives for Plastics, Polybutylene Terephthalate, Polyethersulphone, Nylon, Polyvinylidene Fluride, Polyphenylene Sulphide, Rubber Reinforced Polypropylene, Thermoplastic Polyetherester, Fibre Reinforced Thermoplastics, Polyurethane Plastics, Speciality Thermoplastics, Styrene Plastics, Polyolefin Plastics,  Plastic Processing  Technology,  Amino Acid by Protein Hydrolysis, Epoxy Resin/Power, Household Plastic Products, Nylon Granules from Nylon Waste, Poly Vinyl Acetate Emulsion, Phenolic Resin, Polyol from Propylene Oxide, Unsaturated Polyester Resin,

The post Hand Book of Plastic Materials and Processing Technology appeared first on EIRI - eBooks and Project Reports.

]]>
HAND BOOK OF PLASTIC MATERIALS AND PROCESSING TECHNOLOGY

INTRODUCTION OF PLASTIC MATERIALS

POLYETHYLENE

 

  • Low density Polyethylene (LDPE)
  • High density Polyethylene (HDPE)
  • Structure and Properties of Polyethylenes
  • Uses and Applications of Polyethylenes
  • Chlorosulphonated Polyethylene

LINEAR LOW DENSITY POLYETHYLENE (LLDPE)

POLYPROPYLENE

 

  • Synthesis of Polypropylene
  • Structure and Properties of Polypropylene
  • New Generation Polyolefins

COPOLYMERS OF ETHYLENE

POLYSTYRENE

 

  • Monomer Synthesis
  • Polymerization of Styrene
  • Structure and Properties of Polystyrene
  • Modification to High Impact Grades
  • Styrene Acrylonitrile (SAN) Copolymers and Ass Resins
  • Processing, Uses and Applications of Polystyrene


ACRYLIC PLASTICS: POLY (METHYL METHACRYLATE)

ACRYLIC FIBRES

POLY (VINYL ACETATE)

Polymers Derived from Poly (Vinyl Acetate)

POLY (VINYL CHLORIDE)

  • Preparation of Vinyl Chloride
  • Polymerization of Vinyl Chloride
  • Structure and Properties of PVC
  • Compounding and processing of PVC
  • Applications of PVC
  • Copolymers of Vinyl Chloride


POLYTETRAFLUOROETHYLENE (PTFE)

COUMARONE INDENE RESINS

POLYACETALS AND POLYETHERES (ACETAL RESINS)

POLYAMIDES

 

  • Preparaton of Poly (Hexamethylene Adipamide): Nylon 66
  • Preparation of Nylon 6
  • Preparation of Nylone 11 and Nylon 12
  • Properties, uses and Applications of the Nylon Polyamides
  • Liquid Crystalline Polymers
  • Aromatic Polyamides


POLYIMIDES

POLYESTERS

 

  • Alkyds for Oleoresinous Varnishes
  • Polyester Resins for Making Laminates and Composites
  • Film and Fibre Forming Polyester: Poly(Ethylene Terephthalate)
  • Microbial Thermoplastics Polyesters

POLYURETHANES

POLYCARBONATES

EPOXY RESINS

CELLULOSE PLASTICS

 

  • Cellulose Nitrate
  • Cellulose Acetate
  • Cellulose Ethers
  • Regenerated Cellulose


PHENOLIC RESINS

  • Chemistry of Resin Formation
  • Commercial Production
  • Phenolic Moulding Powders
  • Phenolic Laminates
  • Cast Phenolics
  • Miscellaneous Applications of Phenolic Resins


AMINO RESINS

  • Urea Formaldehyde Resins
  • Melamine Formaldehyde Resins


SILICONES

ADDITIVES FOR PLASTICS

  • Fillers
  • Plasticizers
  • Stabilizers
  • Colouring Matters
  • Lubricating and Flow Promoters
  • Cross Linking Agents
  • Other Additives

POLYBUTYLENE TEREPHTHALATE

POLYETHERSULPHONE

NYLON

POLYVINYLIDEN E FLUORIDE

POLYPHENYLENE SULPHIDE

RUBBER REINFORCED POLYPROPYLENE

THERMOPLASTIC POLYETHERESTER

FIBRE REINFORCED THERMOPLASTICS

POLYURETHANE PLASTICS

 

  • Introduction
  • Molecular structure property relationship
  • Typical reactions
  • Monomeric components
  • Properties and applications of polyurethanes
  • Rigid polyurethane and polyisocyanurate foams
  • Reaction injection moulded polyurethane products
  • Elastomeric and resinous thermosetting polyurethanes
  • Thermoplastic polyurethanes
  • Polyurethanes as surface coatings, adhesives & sealants

SPECIALITY THERMOPLASTICS

 

  • Fluoroplastics
  • Poly(tetrafluoroethylene)
  • Poly(vinylidene fluoride)
  • Other fluoropolymers
  • Polysulphones
  • Poly(phenylene sulphide, (PPS)

STYRENE PLASTICS

 

  • Plystyrene
  • High Impact polystyrene (HIPS)
  • Styrene copolymers
  • ABS Plastics
  • Polystyrene poly (phenylene oxide) blends

POLYOLEFIN PLASTICS

  • Polyethylene
  • Polybutene
  • High density polyethylene
  • Low density polyethylene
  • Linear low density polyethylene
  • Very low density polyethylene
  • Blends of ethylene polymers
  • Ethylene copolymers
  • Polybut-l-ene
  • Poly-4-methylpent-1-ene(P4MP)


PLASTIC PROCESSING TECHNOLOGY

  • Plastic Processing Technology
  • Moulding Techniques
  • Forming Techniques
  • Other Techniques
  • Polymer Molecular Society: A Grand Model for Human Society
  • Social Relevance and Perspective
  • Polymer Society vis-a-vis Human Society
  • Stabilization Role of Polymerization and Polymer Stability
  • Helping Hand of Polymers
  • Polymer Education and its All Round Influence
  • Polymers and Environment

AMINO ACID BY PROTEIN HYDROLYSIS

  • Manufacturing process
  • Plant Economics of Amino Acid by Protein Hydrolysis
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point

EPOXY RESIN/POWER

  • Manufacturing Process
  • Plant Economics of Epoxy Resins
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point


HOUSEHOLD PLASTIC PRODUCTS

 

  • Manufacturing Process
  • Plant Economics of House Hold Plastic Products
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point


NYLON GRANULES FROM NYLON WASTE

 

  • Manufacturing Process of Nylon Granules from Nylon Waste
  • Plant Economics of Nylon Granules from Nylon Wate
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point


POLY VINYL ACETATE EMULSION

  • Manufacturing Process
  • Formulation
  • Plant Economics of  Poly Vinyl Acetate Emulsion
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point

PHENOLIC RESIN

 

  • Process of Manufacture
  • Plant Economics of Phenolic Resin
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point


POLYOL FROM PROPYLENE OXIDE

 

  • Manufacturing Process of Polyol from Propylene Oxide
  • Plant Economics of Polyol from Propylene Oxide
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point


UNSATURATED POLYESTER RESIN

 

  • Process of Manufacture
  • Plant Economics of Polyester Resin
  • Rated Plant Capacity
  • Land and Building
  • Plant and Machinery
  • Fixed Capital
  • Raw Materials
  • Total Capital Investment
  • Turnover/Annum
  • Profit Sales Ratio
  • Rate of Return
  • Break Even Point


Engineers India Research Institute (EIRI) is a renowned name in the industrial world for offering technical and financial consultancy services.

EIRI services are:

  • Detailed Feasibility Reports
  • New Project Identification
  • Project Feasibility and Market Study
  • Identification of Lucrative Industrial Project Opportunities
  • Preparation of Project Profiles / Pre-Investment and Detailed Feasibility Studies,
  • Market Surveys / Studies, Market Survey Cum Detailed Techno-Economic Feasibility Reports
  • Project Reports in CD Roms
  • Identification of Plant /Process/Machinery and Equipment, Industrial General Guidance for setting up new industrial projects.


Our most up-to-date and Technologically Advanced Industrial Project Reports, categorized with respect to Financial Outlays and Sector – wise Classification are immensely useful for :

  • Existing Small or Medium Scale Industrialists facing competition from large houses
  • Young Entrepreneurs dreaming to start their own industrial enterprise
  • Young Graduates and Professionals wishing to begin their career
  • Industrialists interested in Debottlenecking  their capacities & New Product – Lines
  • Large Industrial Houses pursuing  Expansion, Growth and Diversification Plans
  •  
  •  

The post Hand Book of Plastic Materials and Processing Technology appeared first on EIRI - eBooks and Project Reports.

]]> Plastic waste recycling unit https://projectreports.eiriindia.org/product/plastic-waste-recycling-unit/ Thu, 10 Oct 2013 10:47:38 +0000 http://projectreports.eiriindia.org/?post_type=product&p=113 How much does it cost to set up a plastic recycling plant?

For plant capacity 2mt/day, you need Rs. 36 lacks for plant and machinery and total capital investment would be approx Rs 1 Crore. This will give you 66% ROI and BEP would be 41%

As an ever increasing number of individuals comprehend the significance of reusing, a plastic waste recycling unit can be a rewarding business adventure. This kind of business requires a great deal of forthright expenses to cover the area, reusing hardware and the representatives to run the apparatus.

A plastic is any one of a large and varied group of Materials which consists of an essential ingredient combinations Of carbon with oxygen, hydrogen, nitrogen and other organic and Inorganic elements. While solid in the finished state, at some Stage in its manufacture it has been or can be formed into Various shapes by flow-usually through the application singly or Together of heat and pressure. Thermoplastics are those which Soften under heat and again harden when cooled and this Process can be repeated a number of times without any Appreciable was in the physical properties. Plastics today have A prominent place in the spectrum of materials frequently used By materials engineers and designers. They have earned this Placed on the basis of performance at a price, plus the Apparently unlimited ability of the plastics industry to Develop new plastics or new grades of older plastics to meet Specific needs of modern industry. With this status and the Tremendous growth of new uses has come an important need for Meaningful data on fundamental plastics behavior under realistic Stresses and strains, couched in engineering terms, in short, Engineering properties as contrasted with data sheet properties. Needed are engineering criteria for rigidity, strength, endurance And temperature range, which are common to nearly all plastic Applications, as well as more specialized performance Characteristics that are important only in certain types of Special product (eg. Electrical properties).

The post Plastic waste recycling unit appeared first on EIRI - eBooks and Project Reports.

]]> Project Report covers:

  • Introduction
  • Uses and Applications
  • Properties
  • Market Survey with future aspects
  • Present Manufacturers
  • B.I.S. Specifications
  • Manufacturing Process with Formulae
  • Plant Layout
  • Cost Economics with Profitability Analysis
  • Capacity
  • Land & Building Requirements with Rates
  • List & Details of Plant and Machinery with their Costs
  • Raw Materials
  • Details/List and Costs
  • Power & Water Requirements
  • Labour/Staff Requirements
  • Utilities and Overheads
  • Total Capital Investment
  • Turnover
  • Cost of Production
  • Break Even Point
  • Profitability
  • Land Man Ratio
  • Suppliers of Plant & Machineries and Raw Materials.

The post Plastic waste recycling unit appeared first on EIRI - eBooks and Project Reports.

]]>