A Disposable syringe is a basic responding siphon comprising of a plunger (however in present-day syringes, it is really a cylinder) that fits firmly inside a round and hollow cylinder called a barrel. For syringe manufacturing plunger can be directly pulled and pushed along within the cylinder, enabling the syringe to take in and oust fluid or gas through a release hole at the front (open) part of the bargain.

The open part of the bargain might be fitted with a hypodermic needle, a spout or tubing to coordinate the stream into and out of the barrel. Syringes are as often as possible utilized in clinical medication to control infusions, imbue intravenous treatment into the circulatory system, apply mixes, for example, paste or oil, and draw/measure fluids.

Disposable syringes are becoming ever more common within the medical industry. This is due in no short part to both the want to streamline the workload and to prevent the spread of blood-borne illnesses. They’re also relatively cheap and easy to mass-produce allowing for a higher level of accessibility.

Disposable Syringe is an instrument which is used for injecting any liquid into the body of human beings or of animals. It consists of a cylinder and an air tight piston. These syringes are used for injecting the medicine into the body or into the nerve of the body which are not possible to take in through mouth or takes much time in mixing with blood.

These syringes are available in sizes varying from 2 C.C. to 100 C.C. Most popular and commonly used sizes are 2 C.C., and 5 C.C. Other sizes are also frequently used but up to lesser extent.

In this project, we are manufacturing the disposable syringes with the sizes are 2 ml, 5 ml, 20 ml and 50 ml.

Previously glass was used for making these syringes; the most commonly used glass is Pyrex glass. This glass is shock-resistant, temperature-resistant and has low thermal co-efficient of expansion. But with the development of plastic technology, this glass has been substituted by high grade plastics. Plastic can be used in place of glass for making syringes without any problem.

Plastic syringes are becoming more popular in the medical world due to its lower cost and higher accuracy. To test the efficiency of a syringe, close the tip with a finger and attempt to withdraw the plunger or piston. If the plunger and barrel fit perfectly, the vacuum created in the cylinder will prevent withdrawal of the plunger. The plunger should not be pulled to return rapidly due to the vacuum created or the barrel may be cracked.

With the development of pharmaceutical industries the use of syringes has also developed. About 70% pharmaceutical industries are in small scale sector. The output of the small scale sector covers a wide spectrum of formulations, which includes antibiotics vitamins, anti T.B. drugs, ant dysentery drugs, anti-rheumatics, haematinies, hormonal preparations, tranquilizers, analgesics and anti-phyreties. Indeed this is a very wider range of product mix. About 50 percent of the above listed drugs are injectable and for that purpose syringes are required.

Disposable Syringes are being used by doctors to inject medicines through intravenous or intramuscular ways for the treatment of diseases & also by research & development personnel. Disposable syringes are made of plastic material and are used in the field of medical and veterinary science. Due to their availability in sterilized condition, ready to use, and cost effectiveness, disposable syringes are fast replacing the age-old glass syringes. Moreover, the horror of AIDS worldwide has almost dispensed with the reuse of syringes and the demand of disposable syringes has increased phenomenally. Disposable syringes are mostly injection molded from polypropylene. Syringes are available in sizes of 1 ml, 2 ml, 5 ml and 10 ml, 50ml in a variety of designs and consist of either two or three components construction. The number and size of injection moulding machines required depend upon syringe construction, number of mould cavities, annual production.

Disposable Syringes made of plastic Material have been successfully used in medical and pharmaceutical practice for many years. The constantly increasing use of this type Syringe indicates its importance. Which is based mainly on the advantages it offers regarding cost and hygienic applications.

The manufacture of plastic syringes has been developed to such a degree that the products now satisfy the requirements and standards set by Hospital and physicians. At the same time they offer the best possible technique of application to the physician and the highest possible degree of safety to the patient.

The post DISPOSABLE PLASTIC SYRINGE appeared first on EIRI - eBooks and Project Reports.

Today consumption of Disposable products is breaking records. Disposable products are easy to handle, economical and can be disposed easily. With the changing lifestyle of Mankind, the use of disposable products is raising like anything. Plastic Disposable products are very popular because it can be carried easily and very low in prices too.

The products include food containers and tableware – like plates, bowls, meal trays and cups – which decompose within 30-60 days after being discarded. The company sources processed bagasse from other organizations. This material is then moulded, dried, heated, and given other final touches. Heat-induced pressing during the manufacturing process gives structural strength to the cutlery. Additionally, the inter-fibre bonding makes the products water and oil resistant. It is a completely natural process and involves no binders, additives, coatings or chemical residues, resulting in a nontoxic, harmless and healthy alternative to plastic. The cutlery also does not impart colour, odour or taste to food. The products are microwave-safe and have an estimated shelf life of two years. Users cannot wash the tableware or containers after use; they have to be discarded.

This is 100% biodegradable & compostable tableware, which is widely used in various functions ,restaurants , festivals as ECO FRIENDLY single time (Use & throw) crockery , it’s produce by Plant extract or residue like Sugarcane Bagasse (SCB) etc., which is Proven Environment friendly 100% Biodegradable and Compostable and not harmful for food, human , soil and Nature. This is becoming more popular due to environment awareness, climate change & NGT/State govt. bans on recyclable plastics. This can be use in microwave and refrigerator also.

10 inch Bagasse Round Regular Plate

Disposable products are made of various materials such as dry leaves, pulp, papers and plastic etc.

Thermoformed fiber is a material made by forming paper fibers or other natural fiber in a mold. The end product can be made into almost any shape for any type of solution. In the process of making thermoformed fiber, the product begins with a process similar to transfer molding. During the process of thermoforming fiber, the product is transferred to a set of heated metal molds that dry the fiber under intense pressure and heat, making an extra drying process unnecessary. The process of thermoforming the pulped fiber delivers parts that have a smooth finish on both sides of the thin and dense walls of the product. There are many advantages to having a thermoformed fiber product with smooth walls. They include: reduced freight and storage costs and the ability to use mechanical denesting. The use of thermoformed fiber is very desirable when visual appearance is preferred.

140ml Bagasse Cup

The process of pulp thermoforming is employed to develop sturdy and smooth packaging. This type of packaging can be used in various industrial and commercial uses. Thermoformed pulp is a desirable alternative to petroleum-based products. American Fiber Packaging has invested in the latest equipment technology and has developed a process to manufacture high-quality thermoformed fiber solutions. Through this process we are able to deliver environmentally responsible products to our customers.

Thermoformed molded fiber products can be customized to specifications and can include clamshells, trays, inserts, and many other types of packaging. Thermoformed pulp is a great alternative to petroleum-based foam products like expanded polystyrene (EPS) for protecting and positioning products inside packaging.

The post DISPOSABLE BIODEGRADABLE PLATES, CUPS AND OTHER PRODUCTS appeared first on EIRI - eBooks and Project Reports.

The post DISPOSABLE PLASTIC SYRINGE appeared first on EIRI - eBooks and Project Reports.

The post DISPOSABLE SYRINGE MANUFACTURING appeared first on EIRI - eBooks and Project Reports.

The post DISPOSABLE PLASTIC SYRINGES (2 ml. & 5 ml. Size) (Cap: 40,000 Nos/Day) appeared first on EIRI - eBooks and Project Reports.