Switches are broadly categorized into two main categories –Fixed Configuration. Modular and
Fixed Configuration switches are switches with a fixed number of ports and are typically not expandable. This category is discussed in further detail below. Cisco Catalyst 2K, 3K and the Cisco 300/500 series are good examples of Fixed Configuration switches.

The Fixed configuration switch category is further broken down into:

– Unmanaged Switches
– Smart Switches
– Managed L2 and L3 Switches

Unmanaged Switches:
This category of switch is the most cost effective for deployment scenarios that require only basic layer 2 switching and connectivity. As such, they fit best when you need a few extra ports on your desk, in a lab, in a conference room, or even at home.
With some Unmanaged switches in the market, you can even get capabilities such as cable diagnostics, prioritization of traffic using default QoS settings, Energy savings capabilities using EEE (Energy Efficient Ethernet) and even PoE (Power Over Ethernet). However, as the name implies, these switches generally cannot be modified/managed. You simply plug them in and they require no configuration at all.

Cisco 100 Series switches are good examples of this category.

INTRODUCTION
MODULAR SWITCHES
CLASSIFICATION OF SWITCHES
CLASSIFICATION OF SWITCHES
USES AND APPLICATION
B.I.S. SPECIFICATION
PROCESS FLOW CHART
ASSEMBLING PROCESS OF MODULAR SWITCH
PROCESS OF ASSEMBLING
MARKET SURVEY    35
EXPORTS DATA OF ELECTRICAL MODULAR SWITCHES
IMPORTS DATA OF ELECTRICAL MODULAR SWITCHES
MANUFACTURERS/SUPPLIERS OF MODULAR SWITCH
SUPPLIERS OF PLANT & MACHINERY
SUPPLIERS OF RAW MATERIALS

APPENDIX – A:

1.      COST OF PLANT ECONOMICS
2.      LAND & BUILDING
3.      PLANT AND MACHINERY
4.      FIXED CAPITAL INVESTMENT
5.      RAW MATERIAL
6.      SALARY AND WAGES
7.      UTILITIES AND OVERHEADS
8.      TOTAL WORKING CAPITAL
9.      COST OF PRODUCTION
10.      PROFITABILITY ANALYSIS
11.      BREAK EVEN POINT
12.      RESOURCES OF FINANCE
13.      INTEREST CHART
14.      DEPRECIATION CHART
15.      CASH FLOW STATEMENT
16.      PROJECTED BALANCE SHEET

The post ELECTRICAL MODULAR SWITCHES appeared first on EIRI - eBooks and Project Reports.

In this way each circuit can be properly protected with essential  apparatus  necessary  to  limit the current flowing in the  event of  a  fault.   Each  unit  can  be  fitted  with  the  measuring instruments to  indicate individual load and the whole  equipment can be standardized.  This makes the maintenance easy.

APPENDIX –A

01.    PLANT ECONOMICS
02.    LAND & BUILDING
03.    PLANT AND MACHINERY
04.    OTHER FIXED ASSESTS
05.    FIXED CAPITAL
06.    RAW MATERIAL
07.    SALARY AND WAGES
08.    UTILITIES AND OVERHEADS
09.    TOTAL WORKING CAPITAL
10.    TOTAL CAPITAL INVESTMENT
11.    COST OF PRODUCTION
12.    TURN OVER/ANNUM
13.    BREAK EVEN POINT
14.    RESOURCES FOR FINANCE
15.    INSTALMENT  PAYABLE IN 5 YEARS
16.    DEPRECIATION CHART FOR 5 YEARS
17.    PROFIT ANALYSIS FOR 5 YEARS
18.    PROJECTED BALANCE SHEET FOR (5 YEARS)

The post INTEGRATED UNIT OF INDUSTRIAL PANELS, LED & CFL BULBS AND SERVO CONTROLLED STABILIZER (EXPORT ORIENTED UNIT) appeared first on EIRI - eBooks and Project Reports.

Tubular poles market is quite good and having bright future scope and new entrepreneurs can well venture into this field. The mand is good in India and Globally. The global utility pole market is estimated $51 billion by 2023 with a CAGR of 4.72% from 2018-19 to 2023-24. The future of the utility pole market looks very good with opportunities in the transmission and distribution sectors. The major growth drivers are increasing power generation capacity, growing transmission and distribution infrastructure, and replacement of aging existing networks. Emerging trends, which have a direct impact on the dynamics of the utility pole industry, include wider use of tubular poles, increased usage of composite poles in transmission and distribution, increased usage of polyurethane coatings, and hot dip galvanizing of steel utility poles. EIRI have prepared the project report on this product which are quite useful for the new entrants whi are willing to enter into this trade.

Each ‘EIRI’ MARKET OVERVIEW CUM DETAILED TECHNO ECONOMIC FEASIBILITY REPORT (Complete Report) tentatively covers
•    Introduction
•    Properties
•    BIS (Bureau of Indian Standard) Specifications & Requirements
•    Uses & Applications
•    Present Indian Market Overview/Position
•    Export & Import Statistics Data
•    Names and Addresses of Existing Units (Present Manufactures)
•    List of Plant & Machineries
•    Miscellaneous Items and Accessories
•    Instruments, Laboratory Equipments and Accessories
•    Electrification, Electric Load and Water
•    Maintenance, Suppliers/Manufacturers of Plant and Machineries
•    Manufacturing Process with Formulations (If applicable)
•    Flow Sheet Diagram
•    List of Raw Materials
•    Availability of Raw Materials
•    Requirement of Staff & Labour
•    Personnel Management
•    Skilled & Unskilled Labour
•    Requirement of Land Area
•    Built up Area
•    Plant Layout
Along with financial details as under:
•    Summary of Capital Cost of Project
•    Land & Side Development Exp.
•    Buildings
•    Plant & Machineries
•    Misc. Fixed Assets
•    Technical Know how Fees & Exp.
•    Preliminary Expenses
•    Pre-operative Expenses
•    Provision for Contingencies
Below mentioned financial statements (Annexure) will be  for 5 to 10 Years
•    Annexure:: Cost of Project and Means of Finance
•    Annexure:: Output, Profitability and Cash Flow Chart
•    Annexure:: Assessment of Working Capital requirements
•    Annexure:: Sources of Finance
•    Annexure:: Balance Sheets
•    Annexure:: Break-Even Analysis and profitability analysis.
•    Annexure:: Quantitative Details-Output/Sales/Stocks
•    Annexure:: Sales Realisation
•    Annexure:: Raw Material Cost
•    Annexure:: Other Raw Material Cost
•    Annexure:: Packing Material Cost
•    Annexure:: Consumables, Store etc.,
•    Annexure:: Employees Expenses
•    Annexure:: Fuel Expenses
•    Annexure:: Power/Electricity Expenses
•    Annexure:: Repairs & Maintenance Exp.
•    Annexure:: Other Mfg. Expenses
•    Annexure:: Administration Expenses
•    Annexure:: Selling Expenses
•    Annexure:: Depreciation Charges - Profitability
•    Annexure:: Depreciation Charges
•    Annexure:: Interest and Repayment - Term Loans
•    Annexure:: Tax on Profit
•    Annexure:: Assumptions for Profitability workings
•    Annexure:: Assessment of Working Capital

The post TUBULAR POLES FOR ELECTRICAL TRANSMISSIONS appeared first on EIRI - eBooks and Project Reports.

A transformer is a device for tranferring energy in a system from  one  circuit  to another. It consists  of  two  independent electric  circuits  linked with a common magnetic  circuit.  This energy  at  low  voltage may be transformed  to  energy  at  high voltage,  or vice versa. In the like manner, current of  a  given value  in one circuit may be transformed into current of  another value  in  a different circuit. the winding  of  the  transformer connected to the supply circuit is termed as primary winding  and these  windings  of  the transformer that are  connected  to  the receiver  circuits  are called secondary  windings.  Transformers having   more  than  one  primary  or  secondary   winding   etc. transformers.

PROJECT REPORT COVERS:

•     Introduction
•     Uses and Applications
•     Properties
•     Market Survey with future aspects
•     Present Manufacturers
•     B.I.S. Specifications
•     Manufacturing Process with Formulae
•    Cost Economics with Profitability Analysis
•     Capacity
•     Land & Building Requirements with Rates
•     List & Details of Plant and Machinery with their Costs
•     Raw Materials
•     Details/List and Costs
•     Power & Water Requirements
•     Labour/Staff Requirements
•     Utilities and Overheads
•     Total Capital Investment
•     Turnover
•     Cost of Production
•     Break Even Point
•     Profitability
•     Land Man Ratio
•     Suppliers of Plant & Machineries and Raw Materials.

The post DISTRIBUTION TRANSFORMER AND REPAIR appeared first on EIRI - eBooks and Project Reports.

PROJECT REPORT COVERS:

•     Introduction
•     Uses and Applications
•     Properties
•     Market Survey with future aspects
•     Present Manufacturers
•     B.I.S. Specifications
•     Manufacturing Process with Formulae
•    Cost Economics with Profitability Analysis
•     Capacity
•     Land & Building Requirements with Rates
•     List & Details of Plant and Machinery with their Costs
•     Raw Materials
•     Details/List and Costs
•     Power & Water Requirements
•     Labour/Staff Requirements
•     Utilities and Overheads
•     Total Capital Investment
•     Turnover
•     Cost of Production
•     Break Even Point
•     Profitability
•     Land Man Ratio
•     Suppliers of Plant & Machineries and Raw Materials.

The post LIGHT EMITTING DIODES appeared first on EIRI - eBooks and Project Reports.

Several types of control boards are in general use. On these are  mounted the necessary indicating and recording  instruments, and  relays.  The  arrangements of devices or  boards  should  be simple  and  distinctive  to aid the operator  under  normal  and emergency  conditions and to avoid the possibility  of  confusion and  mistakes.  The control and indicating devices of  each  main power  circuit  should  be clearly set off  from  those  of  othr circuits.

The assembly of the panels and the selection of the type of panel  depind entirely upon the size and type of the station  and on local conditions.

The  panel  type board may prove too long  for  satisfactory operation  in  very  large stations, although this  type  is  the simplest and least expensive.

PROJECT REPORT COVERS:

•     Introduction
•     Uses and Applications
•     Properties
•     Market Survey with future aspects
•     Present Manufacturers
•     B.I.S. Specifications
•     Manufacturing Process with Formulae
•    Cost Economics with Profitability Analysis
•     Capacity
•     Land & Building Requirements with Rates
•     List & Details of Plant and Machinery with their Costs
•     Raw Materials
•     Details/List and Costs
•     Power & Water Requirements
•     Labour/Staff Requirements
•     Utilities and Overheads
•     Total Capital Investment
•     Turnover
•     Cost of Production
•     Break Even Point
•     Profitability
•     Land Man Ratio
•     Suppliers of Plant & Machineries and Raw Materials.

The post CONTROL PANEL BOARDS appeared first on EIRI - eBooks and Project Reports.

The demand for Medium Voltage Switch Gear will increase  due to  the  Industrial development and  rural  Electrification.  The different Medium Voltage Switchgear are 3.3 KV, 11 KV, 22 KV & 33 KV or as per customer requirement and specification.

PROJECT REPORT COVERS:

•     Introduction
•     Uses and Applications
•     Properties
•     Market Survey with future aspects
•     Present Manufacturers
•     B.I.S. Specifications
•     Manufacturing Process with Formulae
•    Cost Economics with Profitability Analysis
•     Capacity
•     Land & Building Requirements with Rates
•     List & Details of Plant and Machinery with their Costs
•     Raw Materials
•     Details/List and Costs
•     Power & Water Requirements
•     Labour/Staff Requirements
•     Utilities and Overheads
•     Total Capital Investment
•     Turnover
•     Cost of Production
•     Break Even Point
•     Profitability
•     Land Man Ratio
•     Suppliers of Plant & Machineries and Raw Materials.

The post MEDIUM VOLTAGE SWITCHGEAR appeared first on EIRI - eBooks and Project Reports.

• Air Conditioners & Parts
• AAC & ACSR Aluminium Conductors
• B.P.O.
• Cyber Café
• Call Centre (International)
• Call Centre (Domestic)
• Ceiling Fan
• Chokes & Patties
• Chokes & Starters
• Choke of Fluorescent Tubes
• Compact Disk
• Computer Education (Institute)
• Computer Assembly
• Computer Continuous Stationery
• Computer Software (E.O.U)
• Cello Tape
• Compact Fluorescent Lamps
• Distribution Transformer
• Domestic Transformer

The post 50 Project Reports on Electrical, Electronics and Computer Based Industries appeared first on EIRI - eBooks and Project Reports.

These  are  switech Fuse Unit, Charge over switch  and  Porcelain Fuse Unit.

Motar Startar are used in agriculture as well as Industry.

Project Reports Cover:

•     Introduction
•     Uses and Applications
•     Properties
•     Market Survey with future aspects
•     Present Manufacturers
•     B.I.S. Specifications
•     Manufacturing Process with Formulae
•    Cost Economics with Profitability Analysis
•     Capacity
•     Land & Building Requirements with Rates
•     List & Details of Plant and Machinery with their Costs
•     Raw Materials
•     Details/List and Costs
•     Power & Water Requirements
•     Labour/Staff Requirements
•     Utilities and Overheads
•     Total Capital Investment
•     Turnover
•     Cost of Production
•     Break Even Point
•     Profitability
•     Land Man Ratio
•     Suppliers of Plant & Machineries and Raw Materials.

The post MOTOR STATAR, MCB, CHANGE OVER SWITCHES & MAIN SWITCHES appeared first on EIRI - eBooks and Project Reports.

Project Reports Cover:

•     Introduction
•     Uses and Applications
•     Properties
•     Market Survey with future aspects
•     Present Manufacturers
•     B.I.S. Specifications
•     Manufacturing Process with Formulae
•    Cost Economics with Profitability Analysis
•     Capacity
•     Land & Building Requirements with Rates
•     List & Details of Plant and Machinery with their Costs
•     Raw Materials
•     Details/List and Costs
•     Power & Water Requirements
•     Labour/Staff Requirements
•     Utilities and Overheads
•     Total Capital Investment
•     Turnover
•     Cost of Production
•     Break Even Point
•     Profitability
•     Land Man Ratio
•     Suppliers of Plant & Machineries and Raw Materials.

The post Processing of Low Grade Tungsten ORE appeared first on EIRI - eBooks and Project Reports.