ERW Pipes – EIRI – eBooks and Project Reports https://projectreports.eiriindia.org We Create Industrialist Sat, 23 Feb 2019 14:43:05 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://projectreports.eiriindia.org/wp-content/uploads/2018/12/cropped-logo-1-32x32.jpg ERW Pipes – EIRI – eBooks and Project Reports https://projectreports.eiriindia.org 32 32 ERW PIPES AND TUBES PLANT https://projectreports.eiriindia.org/product/erw-pipes-and-tubes-plant/ Wed, 30 Jan 2019 10:18:03 +0000 https://projectreports.eiriindia.org/?post_type=product&p=12511 Electric resistance welded (ERW) pipe is manufactured by cold-forming a sheet of steel into a cylindrical shape. Current is then passed between the two edges of the steel to heat the steel to a point at which the edges are forced together to form a bond without the use of welding filler material. Initially this manufacturing process used low frequency A.C. current to heat the edges. This low frequency process was used from the 1920’s until 1970. In 1970, the low frequency process was superseded by a high frequency ERW process which produced a higher quality weld.

Over time, the welds of low frequency ERW pipe was found to be susceptible to selective seam corrosion, hook cracks, and inadequate bonding of the seams, so low frequency ERW is no longer used to manufacture pipe. The high frequency process is still being used to manufacture pipe for use in new pipeline construction

ERW steel pipes & tubes find widespread usage across industries and fields. In addition to various engineering industries, they are used for water, oil and gas distribution, line pipes, fencing, scaffolding, etc. They are also used for agricultural purposes, drinking water supply, thermal power, for hand pumps for deep boring wells and also as protection for cables (telecom), among others. Depending on the requirement of the end user industry, ERW steel pipes & tubes are available in various wall thicknesses, diameters, and qualities. The different types include line precision pipes, tubular poles, electric poles, lightweight galvanized pipes for sprinkler irrigation, among others. The industry has sufficient capacity to manufacture the different types of pipes & tubes. High performance ERW steel pipes & tubes possess high strength, toughness and are corrosion resistant. In the manufacturing process of ERW steel pipes & tubes, the edges to be welded are mechanically pressed together and electric resistance or electric induction is used to generate the heat required for welding. With the adoption of better welding technology, ERW pipes & tubes are now widely used in the oil & gas sector. A number of ERW steel pipes & tubes production units are in the SSI sector. Higher demand from the oil & gas industry, infrastructure and automobile industries has led to a healthy increase in production of ERW steel pipes.

The post ERW PIPES AND TUBES PLANT appeared first on EIRI - eBooks and Project Reports.

]]> INTRODUCTION
IMPLEMENTATION OF SCHEDULE OF ACTIVITY OF PROJECT
TYPES OF ERW PIPE
(1) LOW-FREQUENCY-WELDED ERW (LF-ERW) PIPE
(2) HIGH-FREQUENCY-WELDED ERW (HF-ERW) PIPE
(3) DIRECT-CURRENT-WELDED ERW (DC-ERW) PIPE
PHYSICAL PROPERTIES OF PIPING MATERIALS
MALLEABILITY
DUCTILITY
BRITTLENESS
ELASTICITY
CONDUCTIVITY
CHEMICAL RESISTANCE/RESISTANCE TO CORROSION
PROPERTIES
ADVANTAGES OF ERW PIPE
USES AND APPLICATION
B.I.S. SPECIFICATION
MARKET POSITION
DOMESTIC DEMAND DRIVERS
CAPACITY EXPANSION BY DOMESTIC PLAYERS
HUGE INVESTMENTS IN THE SOUTH/EAST INDIA
EXPORT DATA OF ERW STEEL PIPE
IMPORT DATA OF ERW STEEL PIPE
MANUFACTURERS/SUPPLIERS OF M.S ERW PIPE
PROCESS FLOW CHART
PROCESS FLOW CHART FOR HOT DIP GALVANISING
MANUFACTURING PROCESS
1. UNCOILED, LAVELED AND WELDING OF STRIP
2. STRIPPING
3. LOOPING
4. EDGE TRIMMING
5. FORMING
6. WELDING
7. BEAD TRIMMING
8. SIZING
9. CUTTING
10. NORMALISING
11. END FACING AND BEVELLING
12. TESTING
ULTRASONIC TESTING
EDDY-CURRENT TESTING
HYDROSTATIC TESTING
MAGNETIC PARTICLE TESTING
RADIOGRAPHIC (X-RAY) TESTING
DYE-PENETRANT TEST
14. MARKING
(15) HOT DIP GALVANISING PROCESS
(A) CONTINIOUS GALVANISING
MAIN STEPS IN CONTINIOUS GALVANISING LINE
(A) PREPARATION OF BLACK COILS
(B) CLEANING
(C) ANNEALING AND COOLING
(D) ZINC BATH MANAGEMENT AND ALLOYING REACTIONS
(E) COATING WEIGHT [MASS] CONTROL AND MEASUREMENT
(F) POST TREATMENTS
TEMPER PASSING
LEVELING
CHEMICAL TREATMENT
INSPECTION
OILING AND RECOILING
(B) BATCH GALVANISING
ZINC BATH COMPOSITION FOR BATCH PROCESS
PART THICKNESS
STEPS IN GALVANISING
(A) PREPARATION
CAUSTIC CLEANING –
PICKLING –
FLUXING –
DRYING –
(B) GALVANISING
(C) POST TREATMENT
SOURCES OF WASTE
WASTE MANAGEMENT IN GALVANISING PROCESS
TYPES OF WASTE
I) ACID WASTE
II) FLUX WASTE
III) DROSS
IV) ASH
V) BAG FILTER DUST
VI) GENERAL AND OTHER WASTES
LIMIT OF POLLUTION IN HOT DIP GALVANISING PROCESS
AIR POLLUTION CONTROL MEASURES FOR ACID FUMES
PLANT AND MACHINERY
(1) UNCOILER
(2) LAVELER
(3) SHEAR AND WELDER
(4) ACCUMULATOR
(5) FORMING AND SIZING SECTION
(5) HF SOLID STATE WELDER
HIGH QUALITY WELDING SEAM.
1. SWITCHGEAR RECTIFYING CABINET
2. INVERTER OUTPUT CABINET
3. CONNECTING OPTICAL FIBER
4. CIRCULATION SOFT WATER COOLING SYSTEM
5. CENTRAL OPERATION CONSOLE
6. MECHANICAL ADJUSTMENT DEVICE
(6) ANNEALING FURNACE
(7) FLYING SAW
MAIN SPECIFICATION:
FLYING SAW ALL DIGITAL CONTROL SYSTEM
(8) FACING AND BEVELING MACHINE
(9) STRAIGHTNER MACHINE
(10) THREADING MACHINE
(11) HYDRAULIC TESTING MACHINE
1) FOR ERW TUBE AND SEAMLESS TUBE
2) FOR LARGER DIAMETER PIPE (HSAW AND LSAW PIPES)
PLANT LAYOUT
SUPPLIERS OF RAW MATERIALS
M.S STRIP COILS
RESSISTANCE WELDING ELECTRODE
PICKLING CHEMICALS
ZINC INGOT
CASTIC SODA
HYDROCLORIC ACID
ZINC AMONIUM CLORIDE
DEGREASING CHEMICAL
PHOSPHATING CHEMICALS
SUPPLIERS OF PLANT AND MACHINERIES
ERW PIPE AND TUBE PLANT
HIGH FREQUENCY INDUCTION WELDER
EOT CRANE
DG SETS
POWER TRANSFORMERS
COOLING TOWER
ETP PLANTS
AIR POLLUTION CONTROL EQUIPMENTS
AIR COMPRESSORS
PLATFORM WEIGHING MACHINE
MATERIAL HANDLING EQUIPMENTS
NDT INSPECTION EQUIPMENT
FIRE FIGHTING EQUIPMENTS
ELECTRICAL MEASURING INSTRUMENTS
SUBMERSIBLE WATER PUMP
LIST OF PLANT & MACHINERY
UTILITY EQUIPMENTS

APPENDIX – A:

1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET

The post ERW PIPES AND TUBES PLANT appeared first on EIRI - eBooks and Project Reports.

]]>