Project report on Granite and Cutting - Technology Book - Feasibility Report - Market Survey - Industrial Report https://projectreports.eiriindia.org/product-tag/granite-and-cutting/ We Create Industrialist Sat, 15 Dec 2018 19:50:35 +0000 en-US hourly 1 https://wordpress.org/?v=6.9 https://projectreports.eiriindia.org/wp-content/uploads/2018/12/cropped-logo-1-32x32.jpg Project report on Granite and Cutting - Technology Book - Feasibility Report - Market Survey - Industrial Report https://projectreports.eiriindia.org/product-tag/granite-and-cutting/ 32 32 GRANITE CUTTING AND POLISHING UNIT https://projectreports.eiriindia.org/product/granite-cutting-polishing-unit/ Thu, 16 Nov 2017 11:19:24 +0000 http://projectreports.eiriindia.org/?post_type=product&p=10314 Granite Slab and Tiles are used in building for the purpose of wall paneling and for the decoration of walls.
So we focus as the development of building as well as industrial or residential.
Moving across the should purposes of a glorious past enriched with tradition and skill, India has emerged as nation devoted to industrial development on sound modern lines. India's industrial progress present a wide spread pattern dotted all over by scores of modern industries covering wide areas of industrial activities and pulsating with modern know how and research the wide spread popularity of granite tile usually more evident in major public monumental building of traditional or conservative design.
The new users of granite tile are also steadily appearing. So far, for exterior granite is used both
structurally and as a veneer, for certain walls, column facing trim, for interior, its uses is even more diversified, for nearly every type of practical and aesthetic need. A brief listing of interior uses would include floor, stairs wall facing, and column toilet, bathroom etc. and as decorative for many purposes. In all these areas granite is unexcelled for end using beauty and low maintenance.
The granite slab and tiles of different sizes having dimension for slap (i) 30cm x 30cm, 40cm x 40cm, 60 x 40cm, 80cm x 40cm, 90cm x 40cm and for tiles dimension is 15cm x 10cm, 20cm x 10cm, 30cm x 10cm and the thickness for slab should be in range of 18mm to 20mm for tiles thickness is 7/8mm.

INTRODUCTION
USES & APPLICATIONS
THE MAIN USES OF GRANITE ARE:
LOCATION
WEAR FACTOR FOR INDIAN GRANITES
PROPERTIES OF GRANITE
PRINCIPAL IMPORTING COUNTRIES OF GRANITE, SANDSTONE ETC.
PRINCIPAL EXPORTING COUNTRIES OF GRANITE
COMPOSITION AND PHYSICAL PROPERTIES
OF GRANITES
CHEMICAL COMPOSITION OF FEW GRANITES IN INDIA
B.I.S. SPECIFICATION
MARKET SURVEY
GRANITE PRODUCTION OF SPAIN AND INDIA IN 2014
PROJECTED PRODUCTION TOTALS (IN TONS) FOR SPAIN-2007- TO 2014
DATA, TECHNIQUE AND SOURCES
INDEPENDENT AND DEPENDENT VARIABLES
PRODUCTION TOTALS (IN TONS) FOR SPAIN-2007- TO 2014
THE RESULTS FOR 2012 AND 2014
MARKET STRATEGY
BUSINESS AND GRANITE AREAS
GRANITE SLAB CUTTING & POLISHING UNIT
INFRASTRUCTURE
LOGISTICS OPERATIONS
GRANITE MARKET OF THE WORLD
GRANITE MARKETS    30
INDIAN-GRANITE EXPORT FROM INDIA
PRODUCTION OF GRANITE IN INDIA (IN THE YEAR 2010 TO 2016)
EXPORT AND IMPORT DATA OF GRANITE (IN THE YEAR 2010 TO 2016)
INSTALLED CAPACITY, PRODUCTION & CAPACITY UTILIZATION OF GRANITE
APPARENT CONSUMPTION OF GRANITE IN INDIA
ESTIMATED DEMAND
DEMAND SUPPLY GAP
DETAILED EXPORT DATA OF INDIAN BLACK GRANITE BLOCKS
INDIA GRANITE TILES EXPORT DATA/STATISTICS. FIND EXPORTER DETAILS PREPARED FROM EXPORT SHIPMENT DATA FROM

INDIA CUSTOMS
MANUFACTURERS/EXPORTERS OF GRANITE SLABS AND TILES
PROCESS OF MANUFACTURE
THE MANUFACTURING PROCESS UNIT INVOLVES THE FOLLOWING
GRANITE POLISHING MACHINE
PROCESSING OPERATION
PROCESSING TECHNIQUE
GRANITE SLABS CUT WITH FRAME SAW EMPLOYING BLADES WITH
DIAMOND-CONTAINING SEGMENTS
PROCESS FLOW DIAGRAM
PLANT LAYOUT
PRINCIPLES OF PLANT LAYOUT
MAJOR PROVISIONS IN ROAD PLANNING FOR MULTIPURPOSE SERVICE ARE
PLANT LOCATION FACTORS
PRIMARY FACTORS
SPECIFIC FACTORS
EXPLANATION OF TERMS USED IN THE PROJECT REPORT
PROJECT IMPLEMENTATION SCHEDULES
INTRODUCTION
PROJECT HANDLING
PROJECT SCHEDULING
PROJECT CONSTRUCTION SCHEDULE
TIME SCHEDULE
SWOT ANALYSIS
SWOT ANALYSIS OF STONE INDUSTRY
STRENGTHS
WEAKNESSES
OPPORTUNITIES
THREATS    88
IMPLEMENTATION SCHEDULE
SUPPLIERS OF PLANT & MACHINERIES
IMPORTED
INDIGENOUS
SUPPLIERS OF RAW MATERIALS
GRANITE BLOCKS

APPENDIX – A:

1.      COST OF PLANT ECONOMICS
2.      LAND & BUILDING
3.      PLANT AND MACHINERY
4.      FIXED CAPITAL INVESTMENT
5.      RAW MATERIAL
6.      SALARY AND WAGES
7.      UTILITIES AND OVERHEADS
8.      TOTAL WORKING CAPITAL
9.      COST OF PRODUCTION
10.      PROFITABILITY ANALYSIS
11.      BREAK EVEN POINT
12.      RESOURCES OF FINANCE
13.      INTEREST CHART
14.      DEPRECIATION CHART
15.      CASH FLOW STATEMENT
16.      PROJECTED BALANCE SHEET

The post GRANITE CUTTING AND POLISHING UNIT appeared first on EIRI - eBooks and Project Reports.

]]> The post GRANITE CUTTING AND POLISHING UNIT appeared first on EIRI - eBooks and Project Reports.

]]> GRANITE CUTTING AND POLISHING UNIT https://projectreports.eiriindia.org/product/granite-cutting-and-polishing-unit/ Mon, 04 Jan 2016 07:04:22 +0000 http://projectreports.eiriindia.org/?post_type=product&p=6070   Granite  is an important structural and ornamental stone  and  because of its high compressive strength and durability,     is  extensively  used  for  massive  structural  works   like     bridges,  piers,  sea  and river walls,  dams and  monumental     buildings,  where  excessive  wear and abrasion is likely  to     occur.   fine  grained  variety  of granite  that  takes  and   preserves  high polish and is susceptible of being carved  is     employed  for  ornamental and monumental works and  also  for     inscription purposes.   Granite is found in several parts  of     India  with  slight variations in the physical properties  of    the  stone  depending upon  the grain size and  the  minerals  that go into its formation.

Granite  is  available  in different colours  mostly  in     gray,  motted grey,  red,  pink,  dark,  blue, white or green     depending  upon  the  colours  desired  and  the  permissible     natural  variations  in colour and texture in  detail  or  by  naming  the  granite  having  the  required  characteristics.

Granite  containing injurious mineral like pyridly and ause     objectionable strain on the stone shall be executed.

Abrasives  include a wide range of materials extensively used  in  almost  every  branch  of  industry  for   cutting,  drilling, grinding and polishing.  The materials employed are  required to be hard,  tough and sharp.  The following are the  principal  natural abrassives and the forms in which they are     used.

1.   INTRODUCTION
2.   MARKET POSITION
3.   INFORMATION ON LICENSCING AND TRADE IN CERAMIC
INDUSTRY SCOPE OF LICENSING UNDER THE ACT
4.   PROCESS OF MANUFACTURE
5.   FLOW PROCESS FOR GLASS BOTTLES
6.   PROCESS FLOW SHEET DIAGRAM
7.   SUPPLIERS OF RAW MATERIALS
8.   SUPPLIERS OF PLANT AND MACHINERY

APPENDIX – A :

1.      COST OF PLANT ECONOMICS
2.      LAND & BUILDING
3.      PLANT AND MACHINERY
4.      FIXED CAPITAL INVESTMENT
5.      RAW MATERIAL
6.      SALARY AND WAGES
7.      UTILITIES AND OVERHEADS
8.      TOTAL WORKING CAPITAL
9.      COST OF PRODUCTION
10.      PROFITABILITY ANALYSIS
11.      BREAK EVEN POINT
12.      RESOURCES OF FINANCE
13.      INTEREST CHART
14.      DEPRECIATION CHART
15.      CASH FLOW STATEMENT
16.      PROJECTED BALANCE SHEET

The post GRANITE CUTTING AND POLISHING UNIT appeared first on EIRI - eBooks and Project Reports.

]]> The post GRANITE CUTTING AND POLISHING UNIT appeared first on EIRI - eBooks and Project Reports.

]]>