latex rubber adhesives – EIRI – eBooks and Project Reports https://projectreports.eiriindia.org We Create Industrialist Fri, 31 May 2019 04:49:24 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 https://projectreports.eiriindia.org/wp-content/uploads/2018/12/cropped-logo-1-32x32.jpg latex rubber adhesives – EIRI – eBooks and Project Reports https://projectreports.eiriindia.org 32 32 LONG CUFF LATEX GLOVES AND NITRILE GLOVES https://projectreports.eiriindia.org/product/long-cuff-latex-gloves-nitrile-gloves/ Sat, 13 Jan 2018 07:45:05 +0000 http://projectreports.eiriindia.org/?post_type=product&p=11213 Surgical gloves and examination gloves are called Medical gloves. These gloves are medical safety accessories that ensure sanitary hospital conditions by limiting patients’ exposure to infectious matter. They also serve to protect health professionals from disease through contact with body fluids.

Medical gloves are traditionally made of latex and powdered with cornstarch. Since cornstarch can impede healing if it gets into tissues (as during surgery), non-powdered gloves are being increasingly used during surgery and other sensitive procedures. Special manufacturing processes are used to compensate for the lack of powder.

There are two main types of gloves: examination and surgical. Surgical gloves have more precise sizing (numbered sizing generally from 2.5 to size 9) and may be made to higher specifications.

Due to the increasing rate of latex allergy among health professionals as well as in the general population, there has been an increasing move to gloves made of non-latex materials such as vinyl or nitrile rubber. However, these gloves have not yet replaced latex gloves in surgical procedures, as gloves made of alternate materials generally do no t fully match the fine control or greater sensitivity to touch available with latex surgical gloves. High-grade non-latex gloves (such as nitrile gloves) also cost two or more times the price of their latex counterparts, a fact that has often prevents switching to these alternate materials in cost-sensitive environments, such as many hospitals.

Powder -free medical gloves are also used in medical clean room environments,
where the need for cleanliness is often similar to that in a sensitive medical environment. Similar but specially tested gloves are used in electronics cleanrooms.

INTRODUCTION
PROPERTIES AND CHARACTERISTICS
USES AND APPLICATION
B.I.S. SPECIFICATION
TYPES OF DISPOSABLE GLOVES
GLOVER PROPERTIES, DEFECT & REMEDIES
MARKET SURVEY
POTENTIAL CONSUMERS
IMPORT OF SURGICAL GLOVES SURGICAL GLOVES IMPORT DATA
DETAILED IMPORT DATA OF SURGICAL GLOVES
INSTALLED CAPACITY, UTILIZATION & PRODUCTION OF SURGICAL GLOVES
APPARENT CONSUMPTION OF SURGICAL GLOVES
ESTIMATED DEMAND
DEMAND SUPPLY GAP
PRESENT MANUFACTURERS/SUPPLIERS/EXPORTERS OF SURGICAL GLOVES
ROLE OF ACCELERATORS IN GLOVES MAKING
TECHNOLOGY AND PRODUCTION PROCESS
FOR SURGICAL GLOVES
PROCESSING METHOD OF SURGICAL GLOVES
MANUFACTURING PROCESS OF SURGICAL GLOVES
FORMULATION OF MEDICAL EXAMINATION GLOVES (LATEX BASED)
FORMULATION OF LATEX SURGICAL GLOVES
FORMULATION OF NITRILE GLOVES
FORMULATION OF NEOPRENE BASED SURGICAL GLOVES
FORMULATION OF SURGICAL GLOVES
PROCESS IN DETAILS
TESTING AND QUALITY CONTROL OF GLOVES
AFTER TREATMENTS OF GLOVES
GLOVE ALLERGY AND ITS REMEDIES
PREPARATION OF A POLYISOPRENE COATED GLOVES
PROCESS OF POWDER FREE GLOVES (POLYURETHANE COATED)
MANUFACTURING PROCESS OF NITRILE GLOVES
PROCESS FLOW FOR MANUFACTURE OF NON-STERILE SURGICAL GLOVES
PLANT LAYOUT
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF PLANT AND MACHINERY
GLOBAL PLANT & MACHINERIES SUPPLIERS
ADDRESSES FOR GETTING PERMISSION/ APPROVAL FOR SURGICAL GLOVES
BUYER’S ADDRESSES FOR SURGICAL GLOVES

APPENDIX – A:

1.      COST OF PLANT ECONOMICS
2.      LAND & BUILDING
3.      PLANT AND MACHINERY
4.      FIXED CAPITAL INVESTMENT
5.      RAW MATERIAL
6.      SALARY AND WAGES
7.      UTILITIES AND OVERHEADS
8.      TOTAL WORKING CAPITAL
9.      COST OF PRODUCTION
10.      PROFITABILITY ANALYSIS
11.      BREAK EVEN POINT
12.      RESOURCES OF FINANCE
13.      INTEREST CHART
14.      DEPRECIATION CHART
15.      CASH FLOW STATEMENT
16.      PROJECTED BALANCE SHEET

The post LONG CUFF LATEX GLOVES AND NITRILE GLOVES appeared first on EIRI - eBooks and Project Reports.

]]> The post LONG CUFF LATEX GLOVES AND NITRILE GLOVES appeared first on EIRI - eBooks and Project Reports.

]]> SURGICAL GLOVES FROM LATEX https://projectreports.eiriindia.org/product/surgical-gloves-from-latex/ Fri, 18 Dec 2015 06:18:19 +0000 http://projectreports.eiriindia.org/?post_type=product&p=5979        In  the  light of the  remarkable performance of  the  latex  products  sector.   It  is  no wonder that  the  sector  has  now attracted a greater  share  of the  interest in manufacturing.  However the smallness of domestic  market  will have to be  realized and new entrepreneur  will  have  to  look towards  international  demand.  The consumption of NR latex is increasing continuously in world since 1980.  Some of the latex product like surgical gloves are likely to have very high demand.

Malaysia with its comparative cost advantage can exploit this opportunity.   Malaysia at present in satisfying 3/4 of world demand for N.R. latexes. But in latex products it's  share is much smaller than this.

PRODUCT INTRODUCTION
PROPERTIES AND CHARACTERISTICS
USES AND APPLICATION
MARKET SURVEY
POTENTIAL CONSUMERS
IMPORT OF SURGICAL GLOVES SURGICAL GLOVES IMPORT DATA
INSTALLED CAPACITY, UTILIZATION & PRODUCTION OF SURGICAL GLOVES
APPARENT CONSUMPTION OF SURGICAL GLOVES
ESTIMATED DEMAND
DEMAND SUPPLY GAP
PRESENT MANUFACTURERS/SUPPLIERS     OF SURGICAL GLOVES
ROLE OF ACCELERATORS IN GLOVES MAKING
TECHNOLOGY AND PRODUCTION PROCESS FOR SURGICAL GLOVES
POWDERED / POWDER FREE GLOVES: COMPARISON OF MANUFACTURING PROCESSES
PROCESSING METHOD OF SURGICAL GLOVES
MANUFACTURING PROCESS OF SURGICAL GLOVES
FORMULATION OF SURGICAL GLOVES
PROCESS FLOW FOR MANUFACTURE OF NON-STERILE SURGICAL GLOVES
PLANT LAYOUT
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF PLANT AND MACHINERY
GLOBAL PLANT & MACHINERIES SUPPLIERS

APPENDIX – A :

1.      COST OF PLANT ECONOMICS
2.      LAND & BUILDING
3.      PLANT AND MACHINERY
4.      FIXED CAPITAL INVESTMENT
5.      RAW MATERIAL
6.      SALARY AND WAGES
7.      UTILITIES AND OVERHEADS
8.      TOTAL WORKING CAPITAL
9.      COST OF PRODUCTION
10.      PROFITABILITY ANALYSIS
11.      BREAK EVEN POINT
12.      RESOURCES OF FINANCE
13.      INTEREST CHART
14.      DEPRECIATION CHART
15.      CASH FLOW STATEMENT
16.      PROJECTED BALANCE SHEET

The post SURGICAL GLOVES FROM LATEX appeared first on EIRI - eBooks and Project Reports.

]]> The post SURGICAL GLOVES FROM LATEX appeared first on EIRI - eBooks and Project Reports.

]]> Technology of Glue and Adhesives with Adhesives Bonding and Formulations https://projectreports.eiriindia.org/product/technology-glue-adhesives-adhesives-bonding-formulations/ Sat, 22 Feb 2014 13:02:29 +0000 http://projectreports.eiriindia.org/?post_type=product&p=1327 The book Technology of Glue and Adhesives with Adhesives Bonding and Formulations covers Silane Coupling Agents, Adhesives based on Biobased,Dental Adhesives,  Adhesive bonding of Thick Steel Adherends for Marine Structures,Underwater Repair Adhesives, Polyimide Structural Adhesive (Semicrystaline), Thermoplastic Composites (Non wood/Wood), Analysis of Adhesives,Adhesives for Speciality Applications, Adhesives for Medical and Biological Field, Adhesives for Nonwoven Fabrics, Meal Bonding Adhesives, Bonding of Plastics (Adhesives for Plastics), Thermoplastic Resin Adhesives, Ethylene Copolymer Hot Melt Adhesives, Plywood Glues, Adhesive Based on Polyurethane, Adhesive for paper Board, Adhesive Tape Manufacturing, B.O.P.P. Self Adhesive Tapes, Construction Adhesive, Latex Rubber Based Adhesive, Liquid Adhesive for Corrugated Board and Boxes, Pressure Sensitive Adhesives for BOPP Tapes (Acrylic Adhesives), Tapoica Starch Adhesive for Corrugated Board and boxes (in Powder Form) (Ready Mix), Vulcanising Adhesive Formulation Vulcanizing Rubber Solution/Cement for Automobile Tyres, Water Based Latex Adhesives, Suppliers of Plant and Machinery for Gums and Adhesives.

The post Technology of Glue and Adhesives with Adhesives Bonding and Formulations appeared first on EIRI - eBooks and Project Reports.

]]> TECHNOLOGY OF GLUE AND ADHESIVES WITH ADHESIVES BONDING AND FORMULATIONS


SILANCE COUPLING AGENTS

  • What is a Silanecoupling agent
  • How does  a silane Coupling Agent Work
  • Hydrolysis Considerations
  • Selecting A Silane Coupling Agent
  • Inorganic Substrate Perspective
  • Selecting A Silane coupling Agent
  • Polymer Applications
  • Thermosets
  • Urethanes
  • Moisture Cureable Urethanes
  • Epoxies
  • Phenolics
  • Thermoplastics
  • Thermoplastic Condensation Polymers
  • Polyolefins
  • Selecting a Silance Coupling Agent
  • Interphase Considerations
  • Hydrophobicity and Wetting
  • Chromatography
  • Liquid Crystal Displays
  • Self Assembled Monolayers (SAMs)
  • Special Topics
  • Dipodal Silance
  • Linker Length
  • Effect of Linker length on the separation of aromatic hydrocarbons
  • Thermal Stability of Silance Coupling Agents
  • Aqueous Systems & Water borne Silanes
  • Masked Silances Latent Functionalty
  • Masked Silanes Moisture Triggered
  • Masked Silanes Heat Triggered
  • Coupling Agents for Metal Substrates
  • Metals that form hydrolytically stable surface oxides e.g. aluminium, tin, titanium
  • Metals that form hydrolytically or mechanically unstable surface oxides e.g. iron, copper , zinc
  • Metals that do not readily form oxides, e.g. nickel, gold and other precious metals
  • Metals that form stable hydrides, e.g. titanium, zirconium, nickel
  • Difficult Substrates
  • Applying Silanes
  • Deposition from aqueous solution is employed for most commercial fiberglass systems
  • Integral blend methods
  • Anhydrous liquid phase deposition
  • Chlorosilanes
  • Applying Silanes
  • Vapor Phase Deposition
  • Spin-On
  • Spray application

ADHESIVES BASED ON BIOBASED

  • Protein Adhesives
  • Soy Based
  • Non-Cross Linked
  • Covalently Cross Linked
  • Other Proteins
  • Casein
  • Blood
  • Hoof and Hide
  • Biomass Aromatic Adhesives
  • Tannin
  • Lignin

DENTAL ADHESIVES

  • Chemical composition
  • Resin components
  • Methacrylic acid (MA)
  • Methyl methacrylate (MMA)
  • Hema
  • Met
  • Aeta
  • 10-MDP
  • MAC-10
  • Phenyl-P
  • Di-Hema phospate and Hema Phosphate
  • Di-methacrylates
  • (Meth) acrylamides
  • Initiator systems
  • Photo initiators
  • Camphorquinone/co-initiator system
  • 1-phenyl-1, 2 propanedione (PPD)
  • Acylphosphine oxides
  • Chemical initiators
  • Inhibitors
  • Solvent
  • Water
  • Ethanol
  • Acetone
  • Filter
  • Specific ingredients
  • Conclusion

ADHESIVE BONDING OF THICK STEEL ADHERENDS FOR MARINE STRUCTURES

  • Adhesive properties
  • Durability in wet environments
  • Resistance to elevated temperatures
  • Bending behaviour of bonded panels
  • Local behaviour of stiffener/plate attachment
  • Elastic stress analysis

UNDERWATER REPAIR ADHESIVES

  • Underwater FRP and Epoxies
  • Underwater Bridge Pile and Pipe Repair
  • North River Bridge, North Carolina
  • Friendship Trails Bridge, Florida
  • Underwater Pipe Wrapping/Curing
  • U.S. Navy Propulsion Shaft covering Repair
  • In-the wet Repair Factors
  • Surface Preparation
  • Electrolytic Corrosion
  • Vacuum/Pressure Application for enhanced bond strength
  • Cure Time
  • DDG-1000 Composite Twisted Rudder (CTR)
  • Underwater CTR Assessment and Repair Theory
  • Single sided repair
  • Taper Angle/Stope
  • Material selection Precured versus Co-Cured Patch
  • Co-Cure Pre-preg versus wet layup
  • Application method
  • Post Repair Assessment

POLYIMIDE STRUCTURAL ADHESIVE (SEMICRYSTALLINE)

  • Experimental
  • Synthesis
  • Characterization
  • Surface treatment
  • Results and Discussion
  • Thermal Stability
  • Melt Rheology
  • Morphology of TPERBPDA-PA
  • Surface Preparation
  • Optimization of Bonding Process
  • Durability Studies on Lap shear Bonds
  • Effect of various solvents
  • Conclusions

THERMOPLASTIC COMPOSITIES (NON-WOOD/WOOD)

  • Wood Thermoplastics
  • Thermoplastic Matrix Materials
  • Additives
  • Processing
  • Performance
  • Mechanical Prperties
  • Durability
  • Markets and Future Trends
  • Nonwood Fibers in Themoplastic Composities
  • Agricultural Fibers
  • Other Fibers
  • Bioplastics
  • PLa Manufacturing
  • Melt Processing of PLAs
  • Properties of PLAs
  • Thermal Properties
  • Hydrolytic Stability
  • Biodegradability
  • Mechanical Properties
  • SUSTAINABILITY
  • Polylactide Fiber Cemposites

ANALYSIS OF ADHESIVES

  • Technical for Analysis and Characterization
  • Average Molecular Weight and Molecular Weight Distribution
  • Gel Permeation Chromatography and Size Exclusion Chromatography
  • Vibrational Spectroscopy
  • Nuclear Magnetic Resonance Spectroscopy
  • Thermal Analysis
  • Differential Thermal Analysis
  • Differential Scannning Calorimetry
  • Dynamic Mechanical Thermal Analysis
  • Develpment of new adhesives
  • Conclusions

ADHESIVES FOR SPECIALITY APPLICATIONS

  • Formulations of Quick Setting
  • Underwater Adhesives
  • High functionality liquid
  • 2,4,6 Tri (dimethylamino methyl)
  • Viscous liquid polyamide
  • Beta (3,4-epoxy cyclohexyl)
  • Cyanocrylic Acid Esters
  • Water based special adhesive for high clay coated Boxes (Vinyl Alcohol)
  • Water based water proof fibre drum adhesive (Vinyl alcohol/starch)
  • Paper cone and paper tube adhesives
  • Water-based adhesives for bonding paper cones (Protein)
  • Water based tube winding adhesive (Dextrin)
  • Water based tube winding Adhesive (Dextin)
  • Water based tube winding adhesive (VA/Starch)
  • Paper to Paper or Other Substrate Adhesives
  • Water based adhesive for bonding paper to aluminium foil (Acrylic)
  • Water based adhesive for bonding paper to aluminium foil (Acrylic/Vinyl acetate)
  • Water based adhesive for  bonding paper to aluminium foil (Butadiene-Acrylonitrile/Resin)
  • Water Based adhesive for bonding paper to paper board (Resins/Styrenebutadiene)
  • Water based adhesive for bonding paper to various substrates (Vinyl Acetate/Resin)
  • Water based water resistant non-koll cross paste for paper (Vinyl alcohol)
  • Water based high tack adhesive for heavy weight paper (Dextrin)
  • Adhesives in the Electrical industry
  • Electromagnetic Shielding


ADHESIVES FOR MEDICAL AND BIOLOGICAL FIELD

  • Denture Adhesive cream
  • Formulation
  • Denture adhesive cream
  • Denture adhesive powder
  • Denture adhesive powder
  • Refractory protective composition

ADHESIVES FOR NONWOVEN FABRICS

  • Butadiene Copolymer Latexes
  • Water based adhesive for bonding canvas to aluminium
  • Water based adhesive for bonding saturated paper to nonwoven fabrics
  • Water based adhesive for bonding nitrile and epichlorohydrin rubber to non–woven fabric
  • Resin master batch
  • Acrylic Polymers (Polyacrylates)
  • Water based adhesive for bonding nonwoven fabric to fibre

METAL BONDING ADHESIVES

  • Carboxy Modified Olefin Copolymer for Can Seams
  • Aluminium to Steel Adhesive
  • Casein

BONDING OF PLASTICS (ADHESIVES FOR PLASTICS)

  • Monomer Phase
  • Aqueous Phase
  • Polyvinyl Acetal Adhesives
  • Hot Melt adhesives
  • metal Coatings
  • Wood Sealer
  • Textile Coatings

THERMOPLASTIC RESIN ADHESIVES

  • Asphalt or Bitumen Adhesives
  • Gas Tight Joints Cement
  • Photographic & Optical Lenses Adhesive
  • Coumarone Indene Resin Adhesives
  • Wood flour to give a doughy consistency
  • Pressure Sensitive tapes
  • Linoleum Cement
  • Coumarone Indene Resin Adhesives
  • Adhesives for Linoleum
  • Surgical Dressing Adhesives
  • Moisture Vapour Resistant Film
  • Vinyl to Fabric Adhesives
  • Solution for Joining Cycle Tubes
  • Shoe Adhesive
  • Shellac adhesives
  • Metal to Metal Adhesive
  • Cement for porcelain & China
  • Gum Arabic etc. Adhesives
  • Postage Stamp Adhesive
  • Water Resistant Glue
  • Cellophane Adhesive
  • Waxed Paper Glue

ETHYLENE COPOLYMER HOT MELT ADHESIVES

  • Book Binding Adhesives
  • Carton and Case Sealing adhesives
  • Carpet application
  • Shoe adhesives
  • Pressure Sensitive Adhesives (PSA)
  • Furniture Adhesives

PLYWOOD GLUES

  • Experimental Procedures
  • Materials
  • Preparation of standard foamed glue mixes
  • Plywood processing
  • Evaluation of adhesive quality
  • Modification and evaluation of soy protein based formulations of foamed plywood glues
  • Statistical analyses
  • Results and discussion
  • Adhesive quality of standard foamed glue mixes
  • Prtein content based replacement of animal blood in foamed glues
  • Adhesive quality of modified foamed glue mixes
  • Cost comparisons of blood based and soy based modified glues
  • Phenol formaldehyde resin preparation and tannin extract
  • Lignin and glyoxalation of lignin
  • Heat and pressure treatment of lignin
  • soy flour formaldehyde resin preparation
  • Soy flour formaldehydelignin (or phenol) preparation
  • Soy flour glyoxal preparation


ADHESIVE BASED ON POLYURETHANE

  • Thermoplastic Composites (Nonwood/Wood)
  • Formulations
  • Manufacturing Process
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum

ADHESIVE FOR PAPER BOARD

  • Introduction
  • Process & Formulations
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum


ADHESIVE TAPE MANUFACTURING

  • Introduction
  • Process & Formulations
  • Formulations
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum

B.O.P.P. SELF ADHESIVE TAPES

  • Introduction
  • Process & Manufacture
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum

CONSTRUCTION ADHESIVE

  • Introduction
  • Formulations with Manufacturing Process of Construction Adhesive
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum


LATEX RUBBER BASED ADHESIVE

  • Introduction
  • Manufacturing Process
  • Formulations and Raw Material
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum


LIQUID ADHESIVE FOR CORRUGATED BOARD AND BOXES

  • Introduction
  • Formulations
  • Manufacturing Process
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum


PRESSURE SENSITIVE ADHESIVES FOR BOPP TAPES (ACRYLIC ADHESIVES)

  • Introduction
  • Formulations
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum


TAPOICA STARCH ADHESIVE FOR CORRUGATED BOARD AND BOXES (IN POWDER FORM) (READY MIX)

  • Introduction
  • Process of Manufacture
  • Formulation for tapoica starch/dextrin adhesive for corrugated board and boxes
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum


VULCANISING ADHESIVE FORMULATION VULCANIZING RUBBER SOLUTION/CEMENT FOR AUTOMOBILE TYRES

  • Introduction
  • Origin
  • Manufacturing Process
  • Formulations and Raw Materials
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum

WATER BASED LATEX ADHESIVES

  • Introduction
  • Formulations for Water Based Latex Adhesives
  • Physical Contants
  • Key Properties
  • Process of Manufacture
  • Plant Economics
  • Plant & Machinery
  • Fixed Capital
  • Raw Materials
  • Total Working Capital/Month
  • Total Capital Investment
  • Turn Over/Annum


SUPPLIERS OF PLANT AND MACHINERY FOR GUMS AND ADHESIVES

The post Technology of Glue and Adhesives with Adhesives Bonding and Formulations appeared first on EIRI - eBooks and Project Reports.

]]>