The post SILICA FROM RICE HUSK ASH 20 MT/DAY appeared first on EIRI - eBooks and Project Reports.

The demand for electroplating and batteries has increased substantially over the years. Nickel sulfate is a prime component in the manufacturing of batteries and electroplating. Based on all these factors, the nickel sulfate market is expected to observe steady growth.

The post NICKEL SULPHATE 500 KG./DAY appeared first on EIRI - eBooks and Project Reports.

The post CALCINED PETROLEUM COKE (CP COKE) (30 MT/DAY ) appeared first on EIRI - eBooks and Project Reports.

The post GRAIN BASED ETHANOL (10 KL/DAY ) appeared first on EIRI - eBooks and Project Reports.

Initial development of Medium density fiberboard (MDF) board took place in Germany
during the Second World War when its timber supplies were practically cut-off from the
supplying countries. Medium density fiberboard (MDF) board plants were set up in
postwar West Germany to meet the demand for reconstruction. In the fifties Medium
density fiberboard (MDF) board manufacturing plants were set up in Europe and USA. The
industry has now developed throughout the world.

The post MEDIUM DENSITY FIBERBOARD (MDF) (60 MT/DAY ) appeared first on EIRI - eBooks and Project Reports.

CPP film, cast polypropylene film cast polypropylene, also known as unstretched polypropylene film, can be divided into general CPP (General CPP, referred to as GCPP) film, aluminized CPP (Metalize CPP, referred to as MCPP) film and Cooking grade CPP (Retort CPP, RCPP for short) film.

The post CAST POLYPROPYLENE FILMS (CPP FILM) appeared first on EIRI - eBooks and Project Reports.

Chromite ore is a strategic mineral. It is a combination of chromite minerals and
gangue minerals that are separated through the beneficiation process after mining.
Mineral beneficiation of chromite ore is the exploitation of physical properties, such
as density and chemical, magnetic, and surface characteristics, to produce
concentrates.

The post CHROMITE PROCESSING PLANT 248 MT/DAY appeared first on EIRI - eBooks and Project Reports.

These types of films differ from BOPP (Biaxially-Oriented Polypropylene) because they
are not oriented. Orientation is a process that increases the tensile strength of film
in a specific direction by stretching or rolling. Strictly speaking, CPP films
experience a small amount of orientation, but only in the Machine Direction (MD), due
to the nature of the process.

Metallised films (or metallized films) are polymer films coated with a thin layer of
metal, usually aluminium. They offer the glossy metallic appearance of an aluminium
foil at a reduced weight and cost. Metallised films are widely used for decorative
purposes and food packaging, and also for specialty applications including insulation
and electronics.

The post METALLIZESD CPP FILM 33.334 MT/DAY appeared first on EIRI - eBooks and Project Reports.

Early in 1970 automobiles were simple in design, lacking many features we take for
granted today, from seat belts to shock absorbers. An integral part of your vehicle’s
suspension system, shock absorbers keep your ride smooth, even over gravel roads, small
potholes, railroad tracks and other roadway obstacles. Modern shock absorbers help
reduce your vehicle’s natural inclination to bounce, roll and sway. In their simplest
form, shock absorbers are hydraulic (oil) pump like devices that help to control the
impact and rebound movement of your vehicle's springs and suspension. Along with
smoothening out bumps and vibrations, the key role of the shock absorber is to ensure
that the vehicle’s tyres remain in contact with the road surface at all times, which
ensures the safest control and braking response from your car .Essentially, shock
absorbers do two things. Apart from controlling the movement of springs and suspension,
shock absorbers also keep your tyres in contact with the ground at all times. At rest
or in motion, the bottom surface of your tyres is the only part of your vehicle in
contact with the road. Any time that a tyre's contact with the ground is broken or
reduced, your ability to drive, steer and brake is severely compromised. Shock
absorbers automatically adjust to road conditions because the faster the suspension
moves, the more resistance they provide.
.
It is intended to prepare a Feasibility Report to install 1000 Pieces/Day (3000 Kg/
Day) Shock Absorber production facility as a Green Field Project.

The post SHOCK ABSORBER appeared first on EIRI - eBooks and Project Reports.

The raw cotton is processed by series of steps which render the cotton hydro-phallic in character and free from external impurities needed to be fit for use in surgical dressings and personal hygiene. Absorbent Cotton is also used for making conventional type of Sanitary napkins or pads besides medical purposes. And fairly good quality of cotton wool is consumed in beauty parlours for removing make up and dirt etc.

Absorbent Cotton also known as Surgical Cotton or Cotton Wool is mainly used for medical purposes in hospitals, nursing homes, dispensaries etc., Because of high fluid absorbency power, it is better known as absorbent cotton. The absorbent cotton should be chemically inert and soft to give maximum protection and should not cause irritation. These properties can be achieved by manufacturing the product as per standard method of manufacture. The raw cotton is processed by series of steps which render the cotton hydro-phillic in character and free from external impurities needed to be fit for use in surgical dressings and personal hygiene.

Absorbent Cotton is also used for making conventional type of Sanitary napkins or pads besides medical purposes. And fairly good quality of cotton wool is consumed in beauty parlours for removing make up and dirt etc., With the development of medical facilities and growing awareness towards personal hygiene, the absorbent cotton industry registered steady growth rate in past and is picking up pace with the spread of education and upward economic growth of towns and villages.

Surgical Bandages are the products manufactured from White Bleached Cotton gauge Cloth of suitable quality. These are available in various widths of running from 2.5cm to 15cms and of length from 3 meters or 4 meters. These are packed in a unit of doz. for sale.

These are mainly used in hospital/Dispensaries for tying the wounds after dressing.

Surgical Cotton is mainly used for cleaning and dressing the wounds by Doctor and Jauhrus's. It is also used by Tailors for putting pads in Woolen Suits etc. and making Novalties items by artists. Of course the Doctors consume the maximum quantity of Surgical Cotton produced in India. In present much advanced time the numbers of doctors are increasing drastically thereby increasing demand for surgical cotton at very fast rate. It also carried a good potential. Medium staple cottons, Bonde was to from cotton Mills or Linters from spinning Mills are used as raw materials for the manufacture of this product. To manufacture surgical cotton anyone of these three materials may be used separately or farely economical blend produce good quality surgical cotton.

Cotton Raw material is cleaned and washed and bleached and sterilized properly by undergoing through a series of processes and render Hydrophile in character by sides rendering it petty free from external organic impurities.

Doctors, Vaidyas and other medical parishioners require surgical cotton and bandage for dressing ulcers and wounds etc. Surgical cotton and bandage are extensively used in hospitals, dispensaries and other institutions where treatment facilities are provided. With the spread and increase of health services in rural and urban areas as well as in the standard of living the demand for this product is increasing year after year. The present policy of the government is to reserve its manufacture for small scale. The small scale unit does not require a license for its production. Lint Cotton (ginned virgin cotton), Cotton Linters, comber cotton and various processed cottons generally available in India are the materials used to make surgical cotton or absorbent cotton and bandage. Lint cotton and comber cotton are used for high quality and long fibre cotton and bandages. Processed cotton materials and cotton linters are used mostly for low cost filler materials in dressings.

The surgical bandages include the manufacture of bandages, rolled bandages, absorbent gauge and medicated gauge. In the field of surgical operations these items are indispensable. These are made of very fine and plain woven cotton cloth. The raw material required for the manufacture of surgical bandages is the bandage cloth is not readily available in the market. According to the needs and requirement for one's own item of manufacture one should arrange with local weavers for the weaving of cotton bandage cloth.

Cotton goods are made soft and absorbent by frequent washing with soap and chemical bleaching or drying in the sun. The processing removes the natural oils and waxes of the cotton fibers so that the water proof quality is lost. Generally about 15% of the raw cotton is removed in the treatment to render it suitable for surgical uses and this treatment is essentially the same for both absorbent cotton and the woven gauge.

The adhesive plaster or bandage is used to cover non-serious wound or cut in the skin. It is formed by a basic layer of plain fabric coated with the adhesive material. There are several factors that affect the performance of the produced adhesive bandage. One of the frequent reported problems is the strong engagement with the skin that causes severe pain to the patient when it is removed from the skin. The peel test is used to determine the force required to remove the bandage from the skin, tissue or other adhesive tape. The aim of research is to study the factors that affect the performance of adhesive bandage—starting from the raw fabric used and some of the manufacturing machine settings (speed, slit knife height). An attachment was made to test the peeling force of adhesive tape on an ordinary tensile testing device. Results show that the storage of the adhesive bandage tape is the most significant factor that affects the mechanical properties of the adhesive tape.

The post SURGICAL COTTON AND ADHESIVE BANDAGE appeared first on EIRI - eBooks and Project Reports.