In general, fillers & stoppers are paste-like materials, highly pigmented, used to fill surface imperfections (fillers) and to make good gross surface defects prior to painting operations (stoppers).

Caulking compounds, putties and same cements have a boiled drying oil, usually combine with resins that act as the binder putty is the thick mixture of finally powdered calcium carbonate (whiting) and acid refined linseed oil which imparts good wetting and grinding characteristics.

White Cement Based Wall Putty is a specially formulated product based on white cement blended with special fillers and additives to be used as putty, filler & sealer, on concrete / mortar walls and ceiling for both interiors & exteriors. It renders to the surface, smooth bright white coating suitable for over coating by different kinds of water and solvent based paints, of attractive colors, giving a durable and smooth finish on the walls. It is water resistant and in turn, imparts additional strength to the walls. It also contains fungicides, preventing fungus. The other feature of the product is that though it is based on cement, but unlike cement paint, it does not require any water for curing.

Technical Data

Requirement of water: 40-45% mixing of paint for application
Pot life: 2 to 3 hours
Hard Drying: 6 to 8 hours
Overcoat ability: 3 to 4 hours
Maximum thickness of total coats: 1.5 mm
Covering on smooth surface: 22-25 sqft / kg / mm

Direction for Use

1. Ensure that wall surface is free from loose particles and any greasy / oily substance by cleaning the surface with emery paper, knifing blade or wire brush as suitable, and wash the wall by water properly.

2. Mix Wall Putty with 40-45% clean water slowly under hand stirring. Continue stirring till a uniform paste is formed.

3. Apply first coat uniformly on already moistened surface with the help of putty blade or trowel. Allow the surface to dry for minimum 3 hours and then apply a second coat. Allow drying for 6 to 8 hours preferably overnight for complete drying depending on ambient temperature and humidity condition.

4. After drying, if needed, the surface should be rubbed with water proof 300-320 mesh emery paper and washed with water. The surface is now ready for application of paint.

Precautions

1. Store in a cool dry place.

The post WALL PUTTY (WHITE CEMENT BASED) appeared first on EIRI - eBooks and Project Reports.

In general, fillers & stoppers are paste-like materials, highly pigmented, used to fill surface imperfections (fillers) and to make good gross surface defects prior to painting operations (stoppers).

Caulking compounds, putties and same cements have a boiled drying oil, usually combine with resins that act as the binder putty is the thick mixture of finally powdered calcium carbonate (whiting) and acid refined linseed oil which imparts good wetting and grinding characteristics.

White Cement Based Wall Putty is a specially formulated product based on white cement blended with special fillers and additives to be used as putty, filler & sealer, on concrete / mortar walls and ceiling for both interiors & exteriors. It renders to the surface, smooth bright white coating suitable for over coating by different kinds of water and solvent based paints, of attractive colors, giving a durable and smooth finish on the walls. It is water resistant and in turn, imparts additional strength to the walls. It also contains fungicides, preventing fungus. The other feature of the product is that though it is based on cement, but unlike cement paint, it does not require any water for curing.

The post WALL PUTTY AND CONSTRUCTION CHEMICALS appeared first on EIRI - eBooks and Project Reports.

In general, fillers & stoppers are paste-like materials, highly pigmented, used to fill surface imperfections (fillers) and to make good gross surface defects prior to painting operations (stoppers).

Caulking compounds, putties and same cements have a boiled drying oil, usually combine with resins that act as the binder putty is the thick mixture of finally powdered calcium carbonate (whiting) and acid refined linseed oil which imparts good wetting and grinding characteristics.

White Cement Based Wall Putty is a specially formulated product based on white cement blended with special fillers and additives to be used as putty, filler & sealer, on concrete / mortar walls and ceiling for both interiors & exteriors. It renders to the surface, smooth bright white coating suitable for over coating by different kinds of water and solvent based paints, of attractive colors, giving a durable and smooth finish on the walls. It is water resistant and in turn, imparts additional strength to the walls. It also contains fungicides, preventing fungus. The other feature of the product is that though it is based on cement, but unlike cement paint, it does not require any water for curing.

INTRODUCTION
USES AND APPLICATIONS
PROPER DRYWALL REPAIR
STATUS OF DOLOMITE IN INDIA
B.I.S. SPECIFICATIONS
SPECIFICATION OF WHITING FOR PAINT & PUTTY
MARKET SURVEY
INDIA CONSTRUCTION CHEMICALS MARKET FORECAST
AND OPPORTUNITIES, 2018
GLOBAL CONSTRUCTION CHEMICALS MARKET
FUNCTION OF DIFFERENT INGREDIENTS IN THE PUTTY
PRESENT MANUFACTURERS/SUPPLIERS OF WALL PUTTY
SPECIFICATION AND USES OF DOLOMITE POWDER
PROPERTIES AND FEATURES OF DRY WALL PUTTY (WHITE CEMENT BASED)
APPLICATION METHOD OF DRY WALL PUTTY (WHITE CEMENT BASED)
WITH TECHNICAL DATA
ADVANTAGE AND COMPARISON OF DRY WALL PUTTY (WHITE CEMENT
BASED OVER TRADITIONAL WALL PUTTY
PROPERTIES OF RAW MATERIALS USED
MANUFACTURING PROCESS OF DOLOMITE POWDER
PROCESS FLOW DIAGRAM OF DOLOMITE GRINDING CUM WALL PUTTY
FORMULATION OF WALL PUTTY
MANUFACTURE OF WHITE CEMENT BASED DRY WALL PUTTY
PRODUCT SPECIFICATIONS
FORMULATION AND PROCESS OF DRY WALL PUTTY (WHITE CEMENT BASED)
FORMULATION OF DRY WALL PUTTY (WHITE CEMENT BASED)
MANUFACTURING PROCESS OF DRY WALL PUTTY (WHITE CEMENT BASED)
PROCESS FLOW DIAGRAM
FORMULATIONS OF WHITE CEMENT BASED PUTTY
CEMENTITIOUS WALL PUTTY FORMULATIONS
INTUMESCENT PUTTY
FLAME-RESISTANT NON-DRYING PUTTY COMPOSITION
SUPPLIERS OF PLANT & MACHINERY
SUPPLIERS OF PLANT & MACHINERY (IMPORTED)
SUPPLIERS OF RAW MATERIALS
RAW MATERIALS CALCULATION

APPENDIX – A :

1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET

The post DOLOMITE POWDER & WALL PUTTY (WHITE CEMENT BASED) appeared first on EIRI - eBooks and Project Reports.

In  general,  fillers & stoppers are  paste-like  materials, highly  pigmented, used to fill surface  imperfections  (fillers) and  to  make  good  gross  surface  defects  prior  to  painting operations  (stoppers).

Caulking  compounds, putties and same cements have a  boiled drying  oil, usually combine with resins that act as  the  binder putty is the thick mixture of finally powdered calcium  carbonate (whiting) and acid refined linseed oil which imparts good wetting and grinding characteristics.

Project Reports Cover:

•     Introduction
•     Uses and Applications
•     Properties
•     Market Survey with future aspects
•     Present Manufacturers
•     B.I.S. Specifications
•     Manufacturing Process with Formulae
•    Cost Economics with Profitability Analysis
•     Capacity
•     Land & Building Requirements with Rates
•     List & Details of Plant and Machinery with their Costs
•     Raw Materials
•     Details/List and Costs
•     Power & Water Requirements
•     Labour/Staff Requirements
•     Utilities and Overheads
•     Total Capital Investment
•     Turnover
•     Cost of Production
•     Break Even Point
•     Profitability
•     Land Man Ratio
•     Suppliers of Plant & Machineries and Raw Materials.

The post WALL PUTTY appeared first on EIRI - eBooks and Project Reports.

Lime Putty comes under Construction Chemicals, The Global Market valued of Construction Chemicals is approximately USD 42.82 billion in 2016 and would be forecasted to grow with a good growth rate of more than 6.21% over the forecast period 2018-2025. The lime making process consists of the burning of calcium and/or magnesium carbonates at and to obtain the derived oxide (CaCO3 ® CaO + CO2). For some manufacture processes significantly higher burning temperature are must, for example dead-burned dolomite. The calcium oxide product from the kiln is probably crushed, milled or screened before being conveyed to silo storage. From the silo, the burned lime is delivered to the end user for use in the form of quicklime, or transferred to a hydrating plant where it reacted with water to produce hydrated/slaked lime.

Each ‘EIRI’ MARKET OVERVIEW CUM DETAILED TECHNO ECONOMIC FEASIBILITY REPORT (Complete Report) tentatively covers
•    Introduction
•    Properties
•    BIS (Bureau of Indian Standard) Specifications & Requirements
•    Uses & Applications
•    Present Indian Market Position (Not Survey)
•    Export & Import Statistics Data
•    Names and Addresses of Existing Units (Present Manufactures)
•    List of Plant & Machineries
•    Miscellaneous Items and Accessories
•    Instruments, Laboratory Equipments and Accessories
•    Electrification, Electric Load and Water
•    Maintenance, Suppliers/Manufacturers of Plant and Machineries
•    Flow Sheet Diagram
•    List of Raw Materials
•    Availability of Raw Materials
•    Requirement of Staff & Labour
•    Personnel Management
•    Skilled & Unskilled Labour
•    Requirement of Land Area
•    Built up Area
•    Plant Layout
Along with financial details as under:
•    Capacity of the Project
•    Land & Side Development Exp.
•    Buildings Cost
•    Plant & Machineries
•    Misc. Fixed Assets
•    Technical Know how Fees & Exp.
•    Preliminary Expenses
•    Pre-operative Expenses
•    Provision for Contingencies
Below mentioned financial statements (Annexure) will be  for 5 to 10 Years
•    Annexure:: Cost of Project and Means of Finance
•    Annexure:: Output, Profitability and Cash Flow Chart
•    Annexure:: Assessment of Working Capital requirements
•    Annexure:: Sources of Finance
•    Annexure:: Balance Sheets
•    Annexure:: Break-Even Analysis and profitability analysis.
•    Annexure:: Quantitative Details-Output/Sales/Stocks
•    Annexure:: Sales Realisation
•    Annexure:: Raw Material Cost
•    Annexure:: Other Raw Material Cost
•    Annexure:: Packing Material Cost
•    Annexure:: Consumables, Store etc.,
•    Annexure:: Employees Expenses
•    Annexure:: Fuel Expenses
•    Annexure:: Power/Electricity Expenses
•    Annexure:: Repairs & Maintenance Exp.
•    Annexure:: Other Mfg. Expenses
•    Annexure:: Administration Expenses
•    Annexure:: Selling Expenses
•    Annexure:: Depreciation Charges - Profitability
•    Annexure:: Depreciation Charges
•    Annexure:: Interest and Repayment - Term Loans
•    Annexure:: Tax on Profit
•    Annexure:: Assumptions for Profitability workings
•    Annexure:: Assessment of Working Capital

The post Lime Putty appeared first on EIRI - eBooks and Project Reports.