Sale!

TECHNOLOGY OF REINFORCED PLASTICS

USD175.00 USD44.00

e-copy (PDF format) will be sent by email within 24-48 hours.

The book Technology of Reinforced Plastics  covers Constructions of Compounds, Sheet Moulding Compounds (SMC), Sheet Moulding Compounds Thermoplastics, Bulk Moulding Compounds, Thermosets, Bulk Moulding Compounds, Thermoplastics,  Manufacturing Process, Compression Moulding, Marco Processes,  Infusion Moulding, Extrusions, Rotational Mouldings, Blow Mouldings, Foams, Calendering

Description

TECHNOLOGY OF REINFORCED PLASTICS contains:

Construction of
Compounds

Material to be compounded
Prepregs


Sheet Moulding
Compounds (SMC)

  •     Low Pressure Moulding
  •     Compounds
  •     VE Moulding Compounds

Sheet Moulding
Compounds Thermoplastic

  •     Glass Mat Thermoplastics
  •     Stampable Sheets
  •     Powder Impregnations
  •     Commingled Glass/
  •     Thermoplastic Filaments
  •     Hot Compaction Technology

Bulk Moulding
Compounds Thermosets


Bulk Moulding
Compounds,
Thermoplastics

  •     Composites of Laminar
  •     Moulding Compounds
  •     Compounding Factors
  •     Aggregation of Filters
  •     Compounding Basics
  •     Additives
  •     Fillers
  •     Reinforcements
  •     Mixing Methods
  •     Mixing Evaluation


Manufacturing
Process

  •     Product Introduction
  •     Fabricating Startup
  •     and Shutdown
  •     Reinforced Thermoplatics
  •     Curing System
  •     Curing Agents for TS Polymer
  •     Systems
  •     Curing Without Accelerators
  •     Selecting a Curing System
  •     Mould Release
  •     Processing and Patience
  •     Reinforcement Patterns
  •     Perform Processes

Compression Mouldings

  •     Compression Transfer Mouldings
  •     Cold Press Mouldings
  •     Hot Press Mouldings
  •     Flexible Plunger Mouldings
  •     Flexible Bag Mouldings
  •     Hand Lay-Ups
  •     Bag Mouldings
  •     Vacuum Bag Mouldings
  •     and Pressures
  •     Wet Lay-Ups
  •     Spray-Ups
  •     Airless Internal Mixing
  •     Bag Moulding Hinterspritzen
  •     Contact Moulding
  •     Squeeze Mouldings
  •     Soluble Core Mouldings
  •     Lost Wax Mouldings


Marco Processes

  •     Reinforced Resin Transfer
  •     Moulding
  •     Equipment
  •     Mixing Technologies
  •     Improvement of Resin
  •     Flow and injection
  •     Improved Process Controls
  •     Feeding and Cleaning
  •     Preform Systems
  •     RTM Melt Resin
  •     Filling Monitoring
  •     Bladder Moulding with RRTM
  •     Advanced RTM
  •     RTM Moulding with Phenolics
  •     RTM Moulding with Epoxies
  •     Autoclave to VARTM


Infusion Moulding
SCRIMP Process

  •     Injection Moulding
  •     Moulding Reinforced
  •     Thermoplastics
  •     Injection Compression
  •     Mouldings
  •     Vacuum Assisted Resin
  •     Injection Mouldings
  •     Overmouldings
  •     D-LIFT Extruder/
  •     Injection Processes
  •     Pushtrusion/Injection
  •     Processes
  •     Injection Mouldings ZMC
  •     Liquid Injection Mouldings
  •     Pulsed Mouldings
  •     Pultrusions
  •     Continuous Laminations
  •     Other Techniques

Extrusions

Pushtrusion/Extrusion
Procecces
Pulsed Melts
Thermoforming
Reinforced Reaction
Injection Mouldings
RIM Infusion Technology
Polyurethane Processes
Long Fiber Technology
Long Fiber Injection Processes

Rotational Mouldings

Blow Mouldings

Foams

  •     Foamed Reservoir Mouldings
  •     Centrifugal Mouldings
  •     Encapsulations
  •     Castings
  •     Stampings
  •     Cold Formings
  •     Comoform Cold Mouldings
  •     Filament Windings
  •     Tape Windings
  •     Fabricating RP Tanks
  •     Processing, Equipment,
  •     Products
  •     Racetrack and other Winders

Calendering

  •     Powder Metallurgy
  •     Processing Fundamentals
  •     Melt Flow Analysis
  •     Processing and Thermal
  •     Interface
  •     Process Control
  •     Processing Window
  •     Processing and Moisture
  •     Drying Operations
  •     Plasticator Melting Operation
  •     Screw
  •     Mixing
  •     Screw Wear
  •     Wear Resistant Barrel
  •     Barrel Heating and
  •     Cooling Method
  •     Puring
  •     Tools
  •     Design of a die includes
  •     Contact Method
  •     Cold Press Moulds
  •     (Low Pressure)
  •     Resin Transfer Moulds
  •     Filament Winding Moulds
  •     Injection and Compression
  •     Moulds
  •     Mould Temperature Controls
  •     Hardening/Platings
  •     Mould Design for RPIM

Assembly/Joining/
Finishing

 

  •     Joining, Fastening
  •     Joints and Adhesives
  •     Painting, Surface Finishing