WALL PUTTY (WHITE CEMENT BASED)

White cement based Wall Putty a plastering material to fill the holes and patches before paint primer or distemper.

In general, fillers & stoppers are paste-like materials, highly pigmented, used to fill surface imperfections (fillers) and to make good gross surface defects prior to painting operations (stoppers).

Caulking compounds, putties and same cements have a boiled drying oil, usually combine with resins that act as the binder putty is the thick mixture of finally powdered calcium carbonate (whiting) and acid refined linseed oil which imparts good wetting and grinding characteristics.

White Cement Based Wall Putty is a specially formulated product based on white cement blended with special fillers and additives to be used as putty, filler & sealer, on concrete / mortar walls and ceiling for both interiors & exteriors. It renders to the surface, smooth bright white coating suitable for over coating by different kinds of water and solvent based paints, of attractive colors, giving a durable and smooth finish on the walls. It is water resistant and in turn, imparts additional strength to the walls. It also contains fungicides, preventing fungus. The other feature of the product is that though it is based on cement, but unlike cement paint, it does not require any water for curing.

Technical Data

Requirement of water: 40-45% mixing of paint for application
Pot life: 2 to 3 hours
Hard Drying: 6 to 8 hours
Overcoat ability: 3 to 4 hours
Maximum thickness of total coats: 1.5 mm
Covering on smooth surface: 22-25 sqft / kg / mm

Direction for Use

1. Ensure that wall surface is free from loose particles and any greasy / oily substance by cleaning the surface with emery paper, knifing blade or wire brush as suitable, and wash the wall by water properly.

2. Mix Wall Putty with 40-45% clean water slowly under hand stirring. Continue stirring till a uniform paste is formed.

3. Apply first coat uniformly on already moistened surface with the help of putty blade or trowel. Allow the surface to dry for minimum 3 hours and then apply a second coat. Allow drying for 6 to 8 hours preferably overnight for complete drying depending on ambient temperature and humidity condition.

4. After drying, if needed, the surface should be rubbed with water proof 300-320 mesh emery paper and washed with water. The surface is now ready for application of paint.

Precautions

1. Store in a cool dry place.