WIRE NAILS MANUFACTURING

The project report includes Present Market Position and Expected Future Demand, Market Size, Statistics, Trends, SWOT Analysis and Forecasts. Report provides a comprehensive analysis from industry covering detailed reporting and evaluates the position of the industry by providing insights to the SWOT analysis of the industry.

We can prepare PROJECT REPORT as per your INVESTMENT PLAN for BANK LOAN REQUIREMENT and INDUSTRY ANALYSIS. All reports are prepared by highly qualified consultants and verified by a panel of experts.

Request Price or Submit Enquiry

A nail consists of a metal rod or shank, pointed at one end and usually having a formed head at the other, that can be hammered into pieces of wood or other materials to fasten them together. A nail is usually made of steel, although it can be made of aluminum, brass, or many other metals. The surface can be coated or plated to improve its corrosion resistance, gripping strength, or decorative appearance. The head, shank, and point may have several shapes based on the intended function of the nail. Of the nearly 300 types of nails made in the United States today, most are used in residential housing construction. The average wood frame house uses between 20,000 and 30,000 nails of various types and sizes

Nails are divided into three broad categories based on their length. In general nails under 1 inch (2.5 cm) in length are called tacks or brads. Nails 1-4 inches (2.5-10.2 cm) in length are called nails, while those over 4 inches (10.2 cm) are some-times called spikes. These categories are roughly defined, and there is considerable crossover between them.

The nails consist of hard drawn bright mild steel wire with a head, which helps in drivingthe nail inside. They are made in various sizes. Wire nails are used for roofing, fastening in carpentry and woodwork, fencing, etc. With the rise in construction activities, both commercial and private, the demand for wire nails is bound to increase. Setting up a plant to make wire nails would thus meet this demand.

A wire nail having a head and a shank integral with the head, the shank being formed with a tip and having an axis, and the head having a circumferential edge defining a complete circle; characterised in that the centre of the head is radially offset from the axis of the shank.

Wire nail is very well known item, as it is very common product, which is normally used in daily life. It is used for fastening purpose. Its use is so wide spread that it has become part and parcel of the life.

Wire nails are pin-shaped, sharp objects of hard metal or alloy used as fasteners. They are typically made of steel, often dipped or coated to prevent corrosion in harsh conditions or improve adhesion. Ordinary nails for wood are usually of soft, low carbon or mild steel while those for concrete are harder. Nails are used for various purposes and industries ranging from building and construction to carpentry. There is a tremendous variety of nails, since they are used for so many different purposes.

There had been an erratic growth of the indigenous industry from past years. Since the manufacture of wire nails could be undertaken on a small scale or even on a cottage scale, there is a mushroom growth of nail making units in operation. Future of wire nails will directly depend upon building activity in country. As we know that at present country is facing acute housing problem. So, now government is much emphasising on housing development, which naturally will lead to greater demand of wire nail. Thus, as an entrepreneur this project offers an exciting opportunity to you.

Wire nail are used to join many things in industries and in other domestic items. The are made of hard carbon wire. They are headed on one end and sharp at another end. The head is used for hammering and sharp end help in penetrating into the object which is to be joined. Wire nail is one hardware that is used mainly in Building construction work, manufacturing boxes for packing etc. due to the increasing population and the necessities attached to it, they are always in demand in the market join small items

A nail consists of three parts the head, shank and the point. It is possible to manufacture nails suitable for various purposes by changing the form of each part, the diameter length, and through a combination of mechanical & chemical processes.

Category: Tag:
Request Price or Submit Enquiry This report gives you access to decisive data such as:
  • Market growth drivers
  • Factors limiting market growth
  • Current market trends
  • Market structure
  • Key highlights
Overview of key market forces propelling and restraining market growth:
  • Up-to-date analyses of market trends and technological improvements
  • Pin-point analyses of market competition dynamics to offer you a competitive edge major competitors
  • An array of graphics, BEP analysis of major industry segments
  • Detailed analyses of industry trends
  • A well-defined technological growth with an impact-analysis
  • A clear understanding of the competitive landscape and key product segments

The report also points out the latest trends in the Worldwide market and the various opportunities to grow in the near future. The report takes help of various analytical tools to predict the market growth of the market during the forecast period.

Each report include Plant Capacity, requirement of Land & Building, Plant & Machinery, Flow Sheet Diagram, Raw Materials detail with suppliers list, Total Capital Investment along with detailed calculation on Rate of Return, Break-Even Analysis and Profitability Analysis. The report also provides a bird's eye view of the global industry with details on projected market size and then progresses to evaluate the industry in detail

About EIRI Board:
EIRI Board is a single destination for all the industry, company and country reports. We feature large repository of latest industry reports, leading and niche company profiles, and market statistics prepared by highly qualified consultants and verified by a panel of experts.

Note: We can also prepare project report on any subject based on your requirement and country. If you need, we can modify the project capacity and project cost based on your requirement.

Our reports provide an expansive market analysis of the sector by covering areas like growth drivers, trends prevailing in the industry as well as comprehensive SWOT analysis of the sector.

Why buy EIRI reports?
  • Our project reports include detailed analysis that help to get industry Present Market Position and Expected Future Demand.
  • Offer real analysis driving variables for the business and most recent business sector patterns in the business
  • This report comprehends the present status of the business by clarifying a complete SWOT examination and investigation of the interest supply circumstance
  • Report gives investigation and top to bottom money related correlation of real players/competitors
  • The report gives gauges of key parameters which foresees the business execution
Our Approach:
  • Our research reports comprehensively cover Indian markets (can be modified as per your country), present investigation, standpoint and gauge for a time of five years*.
  • The market conjectures are produced on the premise of optional research and are cross-accepted through associations with the business players
  • We use dependable wellsprings of data and databases. What's more, data from such sources is handled by us and incorporated into the report

Description

INTRODUCTION
TYPES OF NAIL INCLUDE:
WIRE NAILS TECHNICAL INFO:
COMMON WIRE NAILS
RAW MATERIALS
USES AND APPLICATION
B.I.S. SPECIFICATION
PROCESS FLOW CHART
MANUFACTURING PROCESS
RAW MATERIAL
TENSIE STRENGTH OF NAIL IRON WIRE
MAIN PROCESS
FORMING
FINISHING
PACKAGING
QUALITY CONTROL
TWO TYPES OF MACHINES ARE
WIRE NAILS MACHINES
FOLLOWING MACHINES ARE REQUIRED TO PRODUCE NAILS:-
HIGH SPEED AUTOMATIC WIRE NAIL MAKING MACHINES
WIRE NAIL MAKING MACHINE – MODEL: N-3
SPECIFICATIONS
WIRE NAIL MAKING MACHINE – MODEL: N-1
WIRE NAIL MAKING MACHINE – MODEL: N-2
WIRE NAIL MAKING MACHINE – MODEL: N-4
WIRE NAIL MAKING MACHINE – MODEL: N-8
GRIPPING DIES
CUTTING DIE
HEADER DIES
AUXILIARY EQUIPMENT:
MODEL NO. 1
MODEL NO. 2
WIRE NAIL MAKING MACHINE – MODEL: N-4
WIRE NAIL MAKING MACHINE – MODEL: N-8
THE FUNCTION OF EACH MACHINE IN THE LINE IS:
PARAMETERS:
C SERIES IS OUR NEW DESIGNED PRODUCT WITH THE ADVANTAGES OF:
THESE 3 MACHINES ARE MAIN MACHINE TO MAKE WIRE NAILS.
SPARE PARTS OF THE NAIL MAKING MACHINE:
MARKET POSITION
EXPORT DATA OF WIRE NAILS
TOTAL VALUE & VOLUME OF EXPORTS IN INDIA
TOP SUPPLIERS
TOP PORTS OF DISCHARGE
IMPORT DATA OF WIRE NAILS
TOTAL VALUE & VOLUME OF IMPORTS IN INDIA
TOP SUPPLIERS
TOP PORTS OF DISCHARGE
PLANT LAYOUT
MANUFACTURERS/SUPPLIERS OF WIRE NAILS
SUPPLIERS OF RAW MATERIALS
SUPPLIERS OF HARD DRAWN LOW CARBON WIRE
SUPPLIERS OF PLANT AND MACHINERY
SUPPLIERS OF WIRE NAIL MAKING MACHINE
SUPPLIERS OF TUMBLING BARRELS
SUPPLIERS OF WIRE NAIL POLISHING MACHINE
SUPPLIERS OF TOOL CUTTER GRINDER MACHINE
AIR POLLUTION CONTROL EQUIPMENTS
AIR CONDITIONING EQUIPMENTS
AIR COMPRESSORS
PLATFORM WEIGHING MACHINE
MATERIAL HANDLING EQUIPMENTS
FIRE FIGHTING EQUIPMENTS
SHOT BLASTING MACHINE
JIGS AND FIXTURE
SUBMERSIBLE WATER PUMP

APPENDIX – A:

1. COST OF PLANT ECONOMICS
2. LAND & BUILDING
3. PLANT AND MACHINERY
4. FIXED CAPITAL INVESTMENT
5. RAW MATERIAL
6. SALARY AND WAGES
7. UTILITIES AND OVERHEADS
8. TOTAL WORKING CAPITAL
9. COST OF PRODUCTION
10. PROFITABILITY ANALYSIS
11. BREAK EVEN POINT
12. RESOURCES OF FINANCE
13. INTEREST CHART
14. DEPRECIATION CHART
15. CASH FLOW STATEMENT
16. PROJECTED BALANCE SHEET

Additional information

Plant Capacity

10.00 MT./day

Land and Building

(500 Sq.Mtr)

Plant & Machinery

US$. 44686

Rate of Return

71%

Break Even Point

32%